Making a custom acrylic mount for WiFi camera

[RMS18]

So i bought a Funlux Wifi camera for the tank, however it needs to be mounted on the tank as i do not have any other spot in the room to place it. With only a 115 degree lens, it needs to be mounted about 4 inches from the glassto view the entire tank. The stock mount will not work, so i was going to make a custom "hang on" mount. Rough copy attached. Anyone know of a very strong or permanent way to bond acrylic? I read up on "Weld On 3" and "Tensol 70."
Also any suggestions on the mount is welcomed.

 

[143MPCo]

@Floyd R Turbo

 

[dbl]

Take a look at the thread below. @Floyd R Turbo started this great tutorial on acrylics. For what it's worth I made something very similar and use it as a mounting arm/wand for a PAR meter. Simple capillary weld using Weld On 4.

http://reef2reef.com/threads/acrylic-fabrication-q-a.224773/

 

[Turbo's Aquatics Verified Sponsor]

Should be pretty easy to make that using just rough-cut material and Weld-on #3, #4, or #16