Max E260 Upgrade Sump ATO?

Gary Ellis

Well-Known Member
View Badges
Joined
Mar 26, 2018
Messages
741
Reaction score
180
What state or country do you live in
Vermont
Rating - 0%
0   0   0
To get less water in the return pump section where do you adjust the float? Lower or higher. I raised it last night and all my water in the reservoir is gone. I'm have a heck of a time controlling my ATO. I tried using the Tunze and it would just keep going off so I tried the red sea ato and same problem. Help please.
 
Has anyone been able to make there Red Sea ATO work properly. No matter how I set things I wake up in the morning and 3/4's of my ATO water is in the display. I have the
gates valve installed and use the Varios 4 return pump on number 3 setting. Where should the float valve be. I've try up and I've tried down. Whats the trick? I can't seem to keep the water level constant in the return pump section.
 
I would ditch the ato it comes with. I use the tunze with my e260. It's on the left pane of glass and the magnet part is wedged between the triangle piece of glass and the baffle.

I would say it goes off 2 or 3 times an hour. I would also see about getting a larger reservoir. I found I could only get a day or two out of the stock one
 
I would ditch the ato it comes with. I use the tunze with my e260. It's on the left pane of glass and the magnet part is wedged between the triangle piece of glass and the baffle.

I would say it goes off 2 or 3 times an hour. I would also see about getting a larger reservoir. I found I could only get a day or two out of the stock one
So it's not uncommon to go through a complete stock ATO reservoir in a day. If that's the case then I understand and things are working as they should. Do you have a picture of the Tunze sensor position? I have the tunze and stopped using it because it would go off all the time. My problem is keeping the return pump section at a constant level. Is my pump to strong at the 3 setting? If I turn the drain gate valve up to much it drains the e260 original back sump to fast and I get noise.
 
On my E260 I use the auto aqua micro. It nearly uses the entire ATO container per day.
 
To get less water in the return pump section where do you adjust the float? Lower or higher. I raised it last night and all my water in the reservoir is gone. I'm have a heck of a time controlling my ATO. I tried using the Tunze and it would just keep going off so I tried the red sea ato and same problem. Help please.

For less water you set the float lower. Also you need to check the amount of water dripping out of the white valve. Simply disconnect the hose on the bottom of the valve and adjust the flow.
89A561C3-BAD7-4E04-B976-8DB319D7CDA9.jpeg
 
Here's a pic of mine with the tunze. I use a Uline slim trash can as a reservoir. It's 23 gallons, lasts around 3 weeks, and low profile
20190419_082025.jpg
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.0%
  • I decorate AROUND the tank or stand

    Votes: 4 16.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 16 64.0%
  • We don’t decorate for the holidays

    Votes: 4 16.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new