Metal Halide Connection

[Overboard]

Is this what you are looking for?

GROW1 DIY Reflector Cord 16 Gauge 15 Foot, 2 Pack

https://a.co/d/3ie4Ck6

I have collected some old magnetic ballasts and there are at least three different styles of plugs. This style is most recent and seems to be most common.

 

[Reefing102]

@djf91 i believe the cord @Overboard linked to is the correct cord

 

[djf91]

Is this what you are looking for?

GROW1 DIY Reflector Cord 16 Gauge 15 Foot, 2 Pack

https://a.co/d/3ie4Ck6

I have collected some old magnetic ballasts and there are at least three different styles of plugs. This style is most recent and seems to be most common.

I think there’s a good chance that is. Thank you.

Here’s a picture of the plug:

 

[oreo54]

I think there’s a good chance that is. Thank you.

Here’s a picture of the plug:

Need an adapter to make life easier..

https://www.htgsupply.com/products/ballast-to-socket-adapter-hyl-to-hydrofarm/?utm_source=Google+Shopping&utm_medium=organic&utm_campaign=Google_Variations_210830_1558&utm_term=Feed+2&gad_source=1&gclid=CjwKCAjw9cCyBhBzEiwAJTUWNSwZYTbPpfnv2Waz_PXiJUbEYVfAjj-zplV83eF-m6lwRIrc5V7TuhoC8LwQAvD_BwE

"Brand S" Plug Adapter (BAASR & BAASP) | Planet Natural

Plug adapters expand your setup options. Allows you to use a Hydrofarm ballast with a brand S reflector, or one of Hydrofarm's reflectors with a brand S ballast.

www.planetnatural.com

 

[Overboard]

That style of plug is called Baasr. The ballast probably has the female side and the cord from your reflector or fixture would have a male connector. The new cord can be directly wired to your reflector to avoid splices but I have spliced them as well using crimp and shrink style connectors. It’s a cleaner look than wire nuts, although I have used them as well.