Microbubbles from Return Plumbing Mystery

theKoolAidMan

Active Member
View Badges
Joined
Aug 1, 2018
Messages
266
Reaction score
431
Rating - 0%
0   0   0
Ever since I get up this Reefer Nano I've been getting a small quantity of miro bubbles coming out of the return nozzle in the tank. It would come and go in spurts and was a small quantity but always kept some bubbles being blown around the tank, which just annoyed me.

Today I cleaned the return pump (an AI Mightyjet DC pump), changed the return host, and reassembled the return nozzle assembly. These bubbles are not present in the sump and not coming from a skimmer (the only equipment in the sump) as it happens even when it's off.

After reassembling everything the problem seems to have gotten even worse. It looks like snow flurries blowing in the tank, like a light snowglobe (except these are tiny bubbles).

Any ideas? The pump is deep enough that it's not creating a whirlpool and pulling air in.
 

rkpetersen

walked the sand with the crustaceans
View Badges
Joined
Sep 14, 2017
Messages
4,529
Reaction score
5,665
Location
Near Seattle
Rating - 0%
0   0   0
Does it happen at different pump output levels? And is there any obstruction to the pump inlet?
 

Idoc

Getting lazier and lazier with upkeep!
View Badges
Joined
Nov 4, 2016
Messages
5,395
Reaction score
9,942
Location
Clarksville, TN
Rating - 0%
0   0   0
There's a leak somewhere in the return line to the tank.

Dry off all the return line pipes and connections. Then shut off your pump. You might then notice a small amount of moisture along the return line that may give away the leak location. If you can't find it, you'll need to re-seal all connections. Do you have any unions? Possibly a bad seal, if so.
 
OP
OP
theKoolAidMan

theKoolAidMan

Active Member
View Badges
Joined
Aug 1, 2018
Messages
266
Reaction score
431
Rating - 0%
0   0   0
There's a leak somewhere in the return line to the tank.

Dry off all the return line pipes and connections. Then shut off your pump. You might then notice a small amount of moisture along the return line that may give away the leak location. If you can't find it, you'll need to re-seal all connections. Do you have any unions? Possibly a bad seal, if so.

I'll check. My prime suspect is the seal going from the hose barb to the bottom of the overflow/bottom of the tank. This is a problem with the Reefers. My Reefer 450 had a leak there when I set it up originally. Had to use teflon tape to fix it. I don't notice a leak on the Reefer nano, but there probably is a very very tiny one.
 

TOP 10 Trending Threads

WHAT AMOUNT OF LIVE ROCK AND SAND SHOULD BE PRIORITIZED FOR OPTIMAL BIODIVERSITY/FILTRATION?

  • 100% live rock + bagged sand

    Votes: 34 28.3%
  • 100% dry rock + 100% live sand

    Votes: 41 34.2%
  • 50/50 live/dry rock, 50/50 live/bagged sand

    Votes: 27 22.5%
  • 75% live rock, 25% live sand

    Votes: 10 8.3%
  • 25% live rock, 75% live sand

    Votes: 8 6.7%
Back
Top