Mixing Salt in a 5 gallon

  • Thread starter Thread starter AdamR0331
  • Start date Start date
  • Tagged users Tagged users None

AdamR0331

Active Member
View Badges
Joined
Feb 1, 2023
Messages
125
Reaction score
39
Location
South Florida
What state or country do you live in
Florida
Rating - 0%
0   0   0
Hello all , first time mixing my own salt using Red Sea blue Bucket and they say 68 degrees should be mixing temperature , I my house is only 75-76 degrees when I went to mix my first time I tested temperature and it was 82 degrees , Could the head be caused By the Pump Im using ???? Should I be using a Power head instead of a Water Pump? is that was is causing the extra heat or should I let the water sit in my house and cool down first ?
1752440569996.png
 
82F is right about where I'd say that's too hot for most saltwater tanks.

If you have a pump in your bucket, yes, the heat from the pump running will heat the water.

I would mix the water at the same temperature as your tank, to minimize shock to the livestock during a water change, so somewhere around like 77F or so. If you're over temp, maybe try a smaller pump, or turn the pump off for little while before a water change to let the water cool down a bit.

As for the RedSea instructions, there may be a chemistry related reason they want you to mix it at a lower temp, but in the end you always want to try to match your tank's temp. I think most would just mix it, store it, and use it at whatever temp your tank runs. I don't think you'll have a problem 🙂

I hope that helps, good luck!
 
82F is right about where I'd say that's too hot for most saltwater tanks.

If you have a pump in your bucket, yes, the heat from the pump running will heat the water.

I would mix the water at the same temperature as your tank, to minimize shock to the livestock during a water change, so somewhere around like 77F or so. If you're over temp, maybe try a smaller pump, or turn the pump off for little while before a water change to let the water cool down a bit.

As for the RedSea instructions, there may be a chemistry related reason they want you to mix it at a lower temp, but in the end you always want to try to match your tank's temp. I think most would just mix it, store it, and use it at whatever temp your tank runs. I don't think you'll have a problem 🙂

I hope that helps, good luck!
Yes Of course , id never throw 82° water into my tank which is 78 , but what i mentioned was how can I acheive mixing red sea salt at 68-70° without water getting hot from pump?
 
Yes Of course , id never throw 82° water into my tank which is 78 , but what i mentioned was how can I acheive mixing red sea salt at 68-70° without water getting hot from pump?
And what is my water is already at like 74° just from natural room temp?
 
Yes Of course , id never throw 82° water into my tank which is 78 , but what i mentioned was how can I acheive mixing red sea salt at 68-70° without water getting hot from pump?
I'm saying don't worry about the 68F-70F. I don't know if anyone does that. I would just mix it at 78F if that's what your tank is 🙂
 
You don’t need your water heated (more than your normal room conditions ) unless you are doing more than 20%, then maybe.

If the pumps doing that I’d either change it out or let the water return to normal room conditions, before mixing.

I’ve mixed Red Sea for a decade, never heated it, just right from RODI, I mix a day, I use it all the next. No special treatment.
 
I don’t think you need pinpoint accurate water temp for salt mixing, I mix mine at room temp in a brute trash can with one of these pumps ( https://amzn.to/4eQYX0o ) and never have an issue. But yes, pumps, especially inefficient ones, can generate significant heat in a small container if operated for a long time.
 

TOP 10 Trending Threads

IF ONE SYSTEM FAILED WHILE YOU WERE AWAY, WHICH WOULD WORRY YOU MOST?

  • Power or backup power

    Votes: 7 25.9%
  • Heating or cooling

    Votes: 1 3.7%
  • Auto top-off

    Votes: 3 11.1%
  • Return pump or water circulation

    Votes: 1 3.7%
  • Dosing or automated testing

    Votes: 0 0.0%
  • Plumbing, overflow, or leaks

    Votes: 5 18.5%
  • Tank sitter or remote monitoring

    Votes: 1 3.7%
  • Electrical failure of some sort

    Votes: 0 0.0%
  • Seam or structure failure

    Votes: 6 22.2%
  • Something else (tell us in the comments)

    Votes: 3 11.1%
Back
Top
Home
Post thread…
Market
What's new