Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What are you trying to achieve by keeping a mix at 1.030??Is it better or worse to mix a higher salinity 1.030 in one 65 gallon container and Rodi in another and let apex probe control final salinity mix in tank?
If tank drops salinity level apex triggers salt mix tank until level increased. If tank increases salinity apex increased water level until 1.026 is achieved. Or am I over thinking this?What are you trying to achieve by keeping a mix at 1.030??
In my opinion I wouldn’t do this, however if you maintain a proper ATK along with optional sensor to maintain water level in your sump you shouldn’t have to worry about your salinity to fluctuate as the ATK will maintain the proper water level for you by topping off the fresh water for that’s evaporated. I hope this helps and makes sense. Instead of this you can setup a AWC using these two containers you have for your build. Just my two cents.If tank drops salinity level apex triggers salt mix tank until level increased. If tank increases salinity apex increased water level until 1.026 is achieved. Or am I over thinking this?
Evaporation should be controlled by ATO. If one gallon of water evaporates, your sump level goes down and one gallon of RODI water is added.So the recommendation is to just mix the salt to 1.026 and only use it to replenish? What about evaporation? Btw 180 gallon tank and 44 gal sump
I do 15% change per week sometimes more depending on maintenanceMost people adjust the salinity at the time of a water change.
You have 200 gallons of water how great is the evap rate? Are you doing weekly water changes or trying to not do changes ?