Mixing Station Temp Control

ehealy13

Active Member
View Badges
Joined
Sep 17, 2020
Messages
226
Reaction score
161
Location
New Jersey
Rating - 0%
0   0   0
Hi all, I have a 20 gallon station I keep in my garage with a pump and heater that I generally keep 50-75% full, for water changes. With the temperatures in NJ in the mid 20's I'm having a difficult time keeping the temp above 70, even with a heater rated for 2x the water volume. Do I need a more powerful heater, or is there something else I should be doing to maintain the temp? Thanks in advance!
 

Peace River

Thrive Master
View Badges
Joined
Apr 29, 2014
Messages
24,850
Reaction score
173,316
Location
USA
Rating - 100%
1   0   0
You may consider wrapping the outside of the storage container, limit the circulation of the water, and maintain a top on the water container which could all help with maintaining the heat.
 

Brett S

Valuable Member
View Badges
Joined
Nov 28, 2016
Messages
1,062
Reaction score
1,352
Location
Orlando
Rating - 0%
0   0   0
I think it either needs more heat or better insulation. I wonder if you put some styrofoam around the outside of the tank and covered the top (probably with more styrofoam) if it would hold the heat better. Ideally you would probably want to have it sitting on a piece of styrofoam too.
 
OP
OP
ehealy13

ehealy13

Active Member
View Badges
Joined
Sep 17, 2020
Messages
226
Reaction score
161
Location
New Jersey
Rating - 0%
0   0   0
You may consider wrapping the outside of the storage container, limit the circulation of the water, and maintain a top on the water container which could all help with maintaining the heat.
Great a advice, I appreciate it! I do have it covered, but not wrapped. What a dummy I am, I just re-did my bathroom and threw out the leftover insulation. Another lesson learned!
 
OP
OP
ehealy13

ehealy13

Active Member
View Badges
Joined
Sep 17, 2020
Messages
226
Reaction score
161
Location
New Jersey
Rating - 0%
0   0   0
I think it either needs more heat or better insulation. I wonder if you put some styrofoam around the outside of the tank and covered the top (probably with more styrofoam) if it would hold the heat better. Ideally you would probably want to have it sitting on a piece of styrofoam too.
Thanks Brett! I think you're right, as there is no insulation currently. I have some styrofoam from the holiday gifts, so I'll definitely try that. Thanks again!
 

Peace River

Thrive Master
View Badges
Joined
Apr 29, 2014
Messages
24,850
Reaction score
173,316
Location
USA
Rating - 100%
1   0   0
Great a advice, I appreciate it! I do have it covered, but not wrapped. What a dummy I am, I just re-did my bathroom and threw out the leftover insulation. Another lesson learned!

No worries! Now you have a plan to make improvements - good luck!
 

Billdogg

Valuable Member
View Badges
Joined
Jun 3, 2017
Messages
2,091
Reaction score
3,004
Location
Grove City, Ohio
Rating - 0%
0   0   0
Thin styrofoam won't help as much as you probably need it to. If it were me, I'd pick up a sheet of the really thick pink stuff at HD/Lowes and make a box out of it. Put the mixing station inside, and you'll be good to go!
 
OP
OP
ehealy13

ehealy13

Active Member
View Badges
Joined
Sep 17, 2020
Messages
226
Reaction score
161
Location
New Jersey
Rating - 0%
0   0   0
Thank you! I actually gave basically a whole bundle of that away 2 weeks ago. Oh well, I'll run to Lowe's and pick up another. I appreciate the help!
 

TOP 10 Trending Threads

DO YOU THINK TECHNOLOGICAL ADVANCEMENTS ARE MORE HELPFUL OR HURTFUL TO REEFING?

  • More helpful.

    Votes: 42 40.4%
  • More hurtful.

    Votes: 4 3.8%
  • I think it depends mostly on the technology.

    Votes: 41 39.4%
  • I think it dependsmostly on the reefer behind the technology.

    Votes: 33 31.7%
Back
Top
Home
Post thread…
Market
What's new