Looking for opinions on making modifications to what is referred to as Rocket Engineers DIY stand design. Would definitely appreciate @RocketEngineer chiming in.
I am building next to an open stairway in limited space so want to put a vertical tower on the right side of the 4x2x2 tank. Will also be adding a custom canopy over the tank the tower height will match top of canopy. Essentially I am trying to make a free standing peninsula stand.
Questions:
I am building next to an open stairway in limited space so want to put a vertical tower on the right side of the 4x2x2 tank. Will also be adding a custom canopy over the tank the tower height will match top of canopy. Essentially I am trying to make a free standing peninsula stand.
Questions:
- Can the 2by ring joist be on the inside of the vertical full height support instead of the outside? What I am thinking is making the vertical full height piece part of the frame for the tower. Similarly on the other end would do the same for supporting the canopy.
- Does the outer dimension of the tank go to the outer edge of the ring joist or is it centered on the ring joist?