MohReef Red Sea XL300

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
Hi all, i just wanted to do a very short build of my Red Sea Xl300, which started at the end of October 2021. This tank was acquired and setup a bit hastily after the bottom glass of my 36’x36’ cracked…( still dont know why). A bit of my personal opinion on the Red Sea package… its ok for a starter tank, the sump size and configuration is limiting, i had to remove sections to fit a clari-sea roller-mat and the plumbing size and config was not to my liking, also had to make provisions for a VU filter.

9E97735C-22A4-44A4-A880-5D6B2CEB0F24.jpeg
 
OP
OP
M

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
Since the bulk-heads of Red Sea tanks are sealed in place and i wanted to increase the diameter of the pipes used…i cut all the fittings off the bulk heads, bore the bulkheads a few mm bigger, made some bushings and stuck everything back together( i guess having all the equipment at work helped… lol) now my main drain is 1.25 inch return line is 1 inch and secondary drain is 1 inch.
 

Attachments

  • 8A401E9A-9F51-4664-8BAF-E468D06E17D6.jpeg
    8A401E9A-9F51-4664-8BAF-E468D06E17D6.jpeg
    143.9 KB · Views: 18
OP
OP
M

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
Since i had rocks, sand and water along with the fish and a few surviving frags from my previous tank(that cracked) in my QT system (about 50 gal) i just transferred everything to the Red Sea tank.
 

Attachments

  • 7AD78A22-FED0-4E7E-BB2B-70620D0900FC.jpeg
    7AD78A22-FED0-4E7E-BB2B-70620D0900FC.jpeg
    105.9 KB · Views: 17
OP
OP
M

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
I started off with two xr15 blue but since the tank is to be an SPS only tank i added a third xr15 shortly after. Flow in the tank is provided by a tunze, one mp40 and two gyres with the return pump being a cor20 running at 55% currently
 
OP
OP
M

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
I quickly came to the conclusion that lots of flow and a sand bed is not going to workout… i was blowing sand off from the rock-work daily …and that was with the pumps running less than half capacity, so i vacuumed out all the sand(each time i did a water change i took a little out) now its totally bare bottom☺️
 

Attachments

  • 812A62BD-6935-485C-B4D8-9763F08BDA9C.jpeg
    812A62BD-6935-485C-B4D8-9763F08BDA9C.jpeg
    270.5 KB · Views: 19
OP
OP
M

MohH

Community Member
View Badges
Joined
Mar 14, 2021
Messages
56
Reaction score
82
Location
ontario
Rating - 0%
0   0   0
The sps frags that survived all the stress of being moved from one tank to another within a short time did not want to start growing… i guess the tank needed time to settle in also(altough rocks etc were from an existing setup) i also added a few new frags, i lost a few of the more delicate ones to stn. Now its at the one year mark the tank seems to be stable and frags r doing better
 

Attachments

  • 9CCB50AA-E24D-4565-AA92-DB34B9982A88.jpeg
    9CCB50AA-E24D-4565-AA92-DB34B9982A88.jpeg
    154.7 KB · Views: 20

Reefing threads: Do you wear gear from reef brands?

  • I wear reef gear everywhere.

    Votes: 7 23.3%
  • I wear reef gear primarily at fish events and my LFS.

    Votes: 1 3.3%
  • I wear reef gear primarily for water changes and tank maintenance.

    Votes: 0 0.0%
  • I wear reef gear primarily to relax where I live.

    Votes: 4 13.3%
  • I don’t wear gear from reef brands.

    Votes: 17 56.7%
  • Other.

    Votes: 1 3.3%
Back
Top