MattP85
New Member
- Joined
- Oct 17, 2023
- Messages
- 1
- Reaction score
- 3
- Location
- Nashville
- What state or country do you live in
- Tennessee
I wanted to get rid of my metal halides and go all led. I will picture the original setup which was a mix of 2 metal halides and 2 t5 bulbs. I originally changed out the T5s for 48 inch orphek3 leds and was able to fit them into the light ficture
with a few cuts. Eventually I got tired of the noise, heat, power consumption, etc. from the metal halides and wanted to go all led without costing a fortune. Here is what I came up with.....
3 projector mounts on the wall on a painted piece of oak. (Amazon link)
https://a.co/d/5nxo7ej
The tank is a 120 Gallon. I was able to adjust the brackets to fit everything together. I have also listed the nuts I used to attach the viparspectra 165w lights along with a slightly longer screw to secure the orphek lights better. Slightly longer than what comes with the lights. Hope this helps! I was scratching my head on how to hang them for a bit.
3 projector mounts on the wall on a painted piece of oak. (Amazon link)
https://a.co/d/5nxo7ej
The tank is a 120 Gallon. I was able to adjust the brackets to fit everything together. I have also listed the nuts I used to attach the viparspectra 165w lights along with a slightly longer screw to secure the orphek lights better. Slightly longer than what comes with the lights. Hope this helps! I was scratching my head on how to hang them for a bit.
