Mounting board

  • Thread starter Thread starter Nick C
  • Start date Start date
  • Tagged users Tagged users None
I built mine. Building it was not the hard part, neatly running all the wires was. Im happy with the outcome and the time investment.

I used 1x3 for the frame (I wish I would have used 1x4 to give me more depth in the cabinet) 3/4" plywood for the front, and 1/4" plywood for the back. It's 28x24.
20181120_115427.jpg

20181116_023129.jpg
20181114_110542.jpg


20181110_220913.jpg

20181110_220923.jpg

20181110_205945.jpg

20181114_231126.jpg
20181112_214629.jpg


20181112_000326.jpg


20181106_205650.jpg
 
I built mine. Building it was not the hard part, neatly running all the wires was. Im happy with the outcome and the time investment.

I used 1x3 for the frame (I wish I would have used 1x4 to give me more depth in the cabinet) 3/4" plywood for the front, and 1/4" plywood for the back. It's 28x24.
20181120_115427.jpg

20181116_023129.jpg
20181114_110542.jpg


20181110_220913.jpg

20181110_220923.jpg

20181110_205945.jpg

20181114_231126.jpg
20181112_214629.jpg


20181112_000326.jpg


20181106_205650.jpg
This looks slick! Very well done
 
I picked up an inexpensive cabinet from target and turned it into a mounting board
V8mkLmyh.jpg

Picked up a piece of cabinet board from menards along with desk grommets
nSuDK00h.jpg

g1BfQtah.jpg

6qlRmHTh.jpg
We're you able to find that inside board in one peice. I ended up getting two 12 x 36 :/
 
We're you able to find that inside board in one peice. I ended up getting two 12 x 36 :/
Yes, it was a big piece, I had to cut it down. I believe it was 36x48
 
Ah yeah I figured. This might be a pain. I only have a mitre saw haha
I was fortunate enough to borrow my dads skill saw :D
 
Here is my setup. Nowhere near as slick as some people's.

20181124_111203.jpg

20181124_104355.jpg
 
I made this from some leftover
IMG_0084.jpg
IMG_0083.jpg
IMG_0097 (1).jpg
IMG_0096.jpg
IMG_0083.jpg
IMG_0083.jpg
IMG_0097 (1).jpg
IMG_0096.jpg
wood and painted it orange. Turns out there is still a mess of wires hidden behind it,
 
I built my stand long so I could fit the controllers in one end. It's just a piece of plywood screwed into place, with grommets. Wires are cable-tied together on the sump side.
20181019_092847.jpeg
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new