Mp10's

[atticus]

Can someone please give me some help with the way pairing these up. I have a 72gal bow front I just install one on each side about 4ish inches down. I have them anti sync with a the factory preset. Is this the best option or should they be synced and should i change the placement?

 

[AdamNC]

On either side is what I prefer on anti-sync so as to get a side to side motion.

 

[CastAway]

Pages 33 and 34 of the Eco Tech manual have some insight on positioning. My on suggestion is to use whatever settings create the most water movement with causing damage or a sand storm. I run to MP 40's all out on a five foot tank and they're not enough IMO. I wish I had two more. Although mine are sync'd, in opposite mode, I run them on constant output.

http://et2017.wpengine.com/wp-content/downloads/FULLMANUAL_Revision1.32.pdf

 

[atticus]

Anyone have a bow front that can suggest good placement?

 

[saltyhog]

I have mine offset with one lower than the other. This creates a little more turbulent flow for me. I actually have two MP40's and two MP10's. The 10's are pointing behind the rock work and the 40's just in front of the rock work.

The right MP40 is the master and the left MP10 is synced with it. The right MP10 and the left MP40 are anti-synced. I run several different programs including Lagoon, Reef Crest, Short Pulse and Nutrient Transport

 

[atticus]

I have mine offset with one lower than the other. This creates a little more turbulent flow for me. I actually have two MP40's and two MP10's. The 10's are pointing behind the rock work and the 40's just in front of the rock work.

The right MP40 is the master and the left MP10 is synced with it. The right MP10 and the left MP40 are anti-synced. I run several different programs including Lagoon, Reef Crest, Short Pulse and Nutrient Transport

You have a bow front?

 

[saltyhog]

You have a bow front?

LOL, no. The principal shouldn't be much different though how close to the front you put them might differ with the bow front?

 

[Crabs McJones]

I have a pair of mp10s 6 inches down in reef crest mode anti sync.
I like the idea above of staggering a little bit and may lower one to 8 inches and leave the other at 6 inches