Mrc mr2r skimmer

  • Thread starter Thread starter Rmckoy
  • Start date Start date
  • Tagged users Tagged users None

Rmckoy

7500 Club Member
View Badges
Joined
Mar 24, 2013
Messages
8,369
Reaction score
10,642
Location
Ontario Canada
Rating - 0%
0   0   0
I recently picked up a gently used but excellent condition skimmer .

Single becket .
After plumbing into my return and running the skimmer as a external skimmer .

I can get a few bubbles but there is about 1” of water in the air chamber .
It rattles a little but will not create any foam .

I installed a T in my return line . Only using a 1300 gph pump as return and skimmer supply .

Thinking that’s possibly the issue ( not enough flow ?

Any suggestions or tips would be great .

Thanks in advance
 
What pump are you using to recirculate water through the Beckett?
 
Pictures would help. Sounds like you my not have it connected properly. The MRC recirculating skimmers need two pumps, one to feed the skimmer and a second to recirculate water through the injector. Beckett injectors need high pressure pumps to work.
 
Pictures would help. Sounds like you my not have it connected properly. The MRC recirculating skimmers need two pumps, one to feed the skimmer and a second to recirculate water through the injector. Beckett injectors need high pressure pumps to work.
I’m not too sure how to attach a picture ....
I think I don’t have enough flow . I’m picking up another submersible pump tomorrow to use strictly for this skimmer .

As soon as this is working .
The bubble Magnus garbage I wasted my money on will be disposed of
 
I’ve long experience with Beckett driven skimmer. Frankly, they’re something of a pain in the petard. Most of them I swapped for mazzei injectors. Beckett’s require sizable pumps, ideally intended for pressure applications. Pumps like iwaki, PanWorld, etc. A submersible pump might work, though probably the current crop of DC pumps will underwhelm. Either way, you need a dedicated pump for the recirculation loop. Teeing off from your return pumps will not work .... as you have discovered.
 
I’ve long experience with Beckett driven skimmer. Frankly, they’re something of a pain in the petard. Most of them I swapped for mazzei injectors. Beckett’s require sizable pumps, ideally intended for pressure applications. Pumps like iwaki, PanWorld, etc. A submersible pump might work, though probably the current crop of DC pumps will underwhelm. Either way, you need a dedicated pump for the recirculation loop. Teeing off from your return pumps will not work .... as you have discovered.

Next question regarding the same skimmer .
Is there somewhere that still sells the additional Beckett or replacement parts ?
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new