Do you have access to your router from another computer? And can you see the Raspberry Pi in the device table?
If not, keep in mind that the Alkatronic will only communicate with one type of device at a time:
Bluetooth or WiFi, but not both at the same time.
So, if you open the app in your phone before the WiFi has completed its connection, the WIFI gets disabled.
In fact, after you complete the above process try disabling the Bluetooth in your phone before you power on the Alkatronic to be sure Bluetooth cannot interrupt the WiFi process.
Then wait 5 minutes and look for Raspberry Pi in the device table of the router again. It should show up.
Let us know hot it goes.
If not, keep in mind that the Alkatronic will only communicate with one type of device at a time:
Bluetooth or WiFi, but not both at the same time.
So, if you open the app in your phone before the WiFi has completed its connection, the WIFI gets disabled.
In fact, after you complete the above process try disabling the Bluetooth in your phone before you power on the Alkatronic to be sure Bluetooth cannot interrupt the WiFi process.
Then wait 5 minutes and look for Raspberry Pi in the device table of the router again. It should show up.
Let us know hot it goes.