Good morning reefers. I am starting a tank build thread for my NUVO EXT 200 Gallon Peninsula tanks which arrives next weekend. I ordered this tank in early December and it wasn't supposed to show up until the end of February so I haven't had alot of time to prepare the things I am going to need to gear it up. If you know my background this is my first attempt at a saltwater reef tank as I have done freshwater for 10 years with success in planted tanks breeding fish etc. That said I will welcome any tips along the way for this build. I will break this first post up into things I have already accomplished for my build versus the many things I still need to get done.
Things I have already accomplished:
I just completed the plumbing on my DIY saltwater mixing station (photographs attached). The mixing station is 4x 44 gallon Brute trash cans 1 to hold the waste water which I will use for my fresh water fish water changes, 1 for RODI and 2 for Salt mixing. The waste bin is independent from the other 3 and just collects waste from the RODI unit with an emergency overflow hard plumbed into my waste water. The RODI bin has a float valve to stop production once its full and is hard plumbed into the 2 saltwater bins via an external pump which can be used to bring RODI to either of the two bins or to a garden hose attachment. I can also utilize the ball valves to bring just salt water to the garden hose attachment. I have wave makers and heaters in the bottom of both salt bins.
I have setup a quarantine tank which will also double as a hospital tank for fish and coral. The tank I choose was a cheap 40 gallon breeder with a simple hang on back filter a small wave pump and a 100W heater. I will start cycling this quarantine tank this weekend where I will use carbon/biological filtration in the hang on back during the cycle but once I start medication and quarantine treatments I will remove the carbon. I have a very nice clipped on radion XR15 for lighting the quarantine tank which cost more than any of the rest of the quarantine tank setup.
Things I need to accomplish:
So as I mentioned before my 200g NUVO arrives this weekend. I am in no shape prepared financially to get this tank up and running anytime soon. I literally have nothing for this tank yet so when it arrives I will fight the battle to get it into my fishroom basement with the help of friends. My greetings post from last month has a nice pic of my fishroom https://www.reef2reef.com/threads/greetings-from-virginia.879645/
I will build the tank stand and get it placed but leave the plumbing until I decide on what sump I want to get etc. My thought on this tank is a want some bigger fish like a Tang or two and perhaps an angelfish. I also mostly want to have clowns that are hosting an anemone. I want corals but am interested in having only a few that are allowed to grow out quite large vice the majority of tanks I see pictures of where corals are crammed up against each other.
Here is my thoughts on the gear that I think will work to get me where I need to be (this stuff is so expensive it will certainly be an all of 2022 project). 40 watt UV sterilizer plumbed into the return flow from the sump. ICE Cap 36XL pre built sump with baffles etc. I doubt the tank comes with a sump and after building my saltwater station I done with DIY for now. RSK 900 reefer internal protein skimmer. 24" XL arch life rock, shapes life rock times 2, liferock tree aquakit, shelf life rock. 60 lbs of either live sand or crushed coral (I originally thought sand but am now leaning crushed coral because I do want so corals that require higher flow like acro). 3 Radion XR 30's. Apex controller and dosing system. Ecochic refugium light by tunze with a medium chaeto starter kit. 1200 watt titanium heater. 4 MP 40 wave pumps. 2 mighty jet return pumps and a battery backup.
That's probably forgetting some other things I will need but I've priced my total build cost out to near 15k which is a huge chunk of change granted one large expense the tank itself has already been purchased and the ancillary requirements like quarantine tank and salt water mixing station have also been taken care of. It will be 30 days until my quarantine tank is cycled and my hope is to begin executing on some of these other expensive item requirements for my display tank with my tax refund.
Things I have already accomplished:
I just completed the plumbing on my DIY saltwater mixing station (photographs attached). The mixing station is 4x 44 gallon Brute trash cans 1 to hold the waste water which I will use for my fresh water fish water changes, 1 for RODI and 2 for Salt mixing. The waste bin is independent from the other 3 and just collects waste from the RODI unit with an emergency overflow hard plumbed into my waste water. The RODI bin has a float valve to stop production once its full and is hard plumbed into the 2 saltwater bins via an external pump which can be used to bring RODI to either of the two bins or to a garden hose attachment. I can also utilize the ball valves to bring just salt water to the garden hose attachment. I have wave makers and heaters in the bottom of both salt bins.
I have setup a quarantine tank which will also double as a hospital tank for fish and coral. The tank I choose was a cheap 40 gallon breeder with a simple hang on back filter a small wave pump and a 100W heater. I will start cycling this quarantine tank this weekend where I will use carbon/biological filtration in the hang on back during the cycle but once I start medication and quarantine treatments I will remove the carbon. I have a very nice clipped on radion XR15 for lighting the quarantine tank which cost more than any of the rest of the quarantine tank setup.
Things I need to accomplish:
So as I mentioned before my 200g NUVO arrives this weekend. I am in no shape prepared financially to get this tank up and running anytime soon. I literally have nothing for this tank yet so when it arrives I will fight the battle to get it into my fishroom basement with the help of friends. My greetings post from last month has a nice pic of my fishroom https://www.reef2reef.com/threads/greetings-from-virginia.879645/
I will build the tank stand and get it placed but leave the plumbing until I decide on what sump I want to get etc. My thought on this tank is a want some bigger fish like a Tang or two and perhaps an angelfish. I also mostly want to have clowns that are hosting an anemone. I want corals but am interested in having only a few that are allowed to grow out quite large vice the majority of tanks I see pictures of where corals are crammed up against each other.
Here is my thoughts on the gear that I think will work to get me where I need to be (this stuff is so expensive it will certainly be an all of 2022 project). 40 watt UV sterilizer plumbed into the return flow from the sump. ICE Cap 36XL pre built sump with baffles etc. I doubt the tank comes with a sump and after building my saltwater station I done with DIY for now. RSK 900 reefer internal protein skimmer. 24" XL arch life rock, shapes life rock times 2, liferock tree aquakit, shelf life rock. 60 lbs of either live sand or crushed coral (I originally thought sand but am now leaning crushed coral because I do want so corals that require higher flow like acro). 3 Radion XR 30's. Apex controller and dosing system. Ecochic refugium light by tunze with a medium chaeto starter kit. 1200 watt titanium heater. 4 MP 40 wave pumps. 2 mighty jet return pumps and a battery backup.
That's probably forgetting some other things I will need but I've priced my total build cost out to near 15k which is a huge chunk of change granted one large expense the tank itself has already been purchased and the ancillary requirements like quarantine tank and salt water mixing station have also been taken care of. It will be 30 days until my quarantine tank is cycled and my hope is to begin executing on some of these other expensive item requirements for my display tank with my tax refund.