NC AL's 8g IOAOI Reef Tank

NC AL

Active Member
View Badges
Joined
May 10, 2024
Messages
252
Reaction score
338
Location
Central
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
Current Picture of the Tank

IMG_1757.jpeg

I was a winner of one of the IOAOI Coralland 8 gallon AIO tanks. (Thank you @IOAOI ) This will be replacing my 5g desktop at work. It’s taken me a few months to be in a position to make the swap over. I bought a second hand Kessil A80 and purchase an AI Axis 40. The axis 40 is overkill, but I can run it at lower speeds and it is dead silent.

IMG_1648[1].JPG

I prefer filter floss to socks. I removed the sock holder plate and built a floss holder and media basket for the first chamber.

IMG_1598[1].JPG
IMG_1647[1].JPG
IMG_1649[1].JPG
img_1651-1-jpg.4160827


The lid was made of marine board. It was notched to fit on the tank without shifting. I also recessed and opening so the kessil will fit and stay in one place. Heat shouldn't be a problem at the intensities I will be running it at. I am testing everything first just in case.

IMG_1653[1].JPG
IMG_1654[1].JPG


My plan for chamber 2 will be a air stone, heater and cheapo UV light. The air stone is in a 1' tube that should reduce bubbles moving into chamber 3. The idea is to be able to run the air stone all the time without introducing any bubbles into the display.


​
Hopefully over the next month I will be able to get every thing set up and moved over. This is the small 5 gallon tank I am replacing.


​

IMG_1662[1].JPG IMG_1648[1].JPG IMG_1598[1].JPG IMG_1647[1].JPG IMG_1649[1].JPG IMG_1651[1].JPG IMG_1653[1].JPG IMG_1654[1].JPG IMG_1686.jpeg IMG_1695.jpeg IMG_1717.jpeg
 
Last edited:
Looking forward to seeing it with water!
 
Current Picture of the Tank

IMG_1662[1].JPG

I was a winner of one of the IOAOI 8 gallon AIO tanks. (Thank you @IOAOI ) This will be replacing my 5g desktop at work. Its taken me a few months to be in a position to make the swap over. I bought a second hand Kessil A80 and purchase an AI Axis 40. The axis 40 is overkill, but I can run it at lower speeds and it is dead silent.

IMG_1648[1].JPG

I prefer filter floss to socks. I removed the sock holder plate and built a floss holder and media basket for the first chamber.

IMG_1598[1].JPG
IMG_1647[1].JPG
IMG_1649[1].JPG
img_1651-1-jpg.4160827


The lid was made of marine board. It was notched to fit on the tank without shifting. I also recessed and opening so the kessil will fit and stay in one place. Heat shouldn't be a problem at the intensities I will be running it at. I am testing everything first just in case.

IMG_1653[1].JPG
IMG_1654[1].JPG


My plan for chamber 2 will be a air stone, heater and cheapo UV light. The air stone is in a 1' tube that should reduce bubbles moving into chamber 3. The idea is to be able to run the air stone all the time without introducing any bubbles into the display.


​
Hopefully over the next month I will be able to get every thing set up and moved over. This is the small 5 gallon tank I am replacing.


​
IMG_1651[1].JPG

IMG_1662[1].JPG IMG_1648[1].JPG IMG_1598[1].JPG IMG_1647[1].JPG IMG_1649[1].JPG IMG_1651[1].JPG IMG_1653[1].JPG IMG_1654[1].JPG
This is awesome same light im going to use on mine.
 
I'm glad to see so many of these popping up !! I have a question.. Why the airstone and UV ? Also,they make a cone shaped "media cup" on Etsy,maybe even @Projects with Sam can point you in the right direction.

Also a Axis 40 is wild lol. I have a IM Mini DC pump turned pretty much all the way and it still moves a TON of water,and thats only a 266gph pump !! I just put a 40 in my WB10 and even in "manual" mode by pressing the button on the controller it still moves an insane amount of water.
 
I'm glad to see so many of these popping up !! I have a question.. Why the airstone and UV ? Also,they make a cone shaped "media cup" on Etsy,maybe even @Projects with Sam can point you in the right direction.

Also a Axis 40 is wild lol. I have a IM Mini DC pump turned pretty much all the way and it still moves a TON of water,and thats only a 266gph pump !! I just put a 40 in my WB10 and even in "manual" mode by pressing the button on the controller it still moves an insane amount of water.
Sam prints one. It fits this and the HelloReef and potentially others. I have one I've designed as well - not as "nice" as Sam's but functional.
 
I'm glad to see so many of these popping up !! I have a question.. Why the airstone and UV ? Also,they make a cone shaped "media cup" on Etsy,maybe even @Projects with Sam can point you in the right direction.

Also an Axis 40 is wild lol. I have a IM Mini DC pump turned pretty much all the way and it still moves a TON of water,and thats only a 266gph pump !! I just put a 40 in my WB10 and even in "manual" mode by pressing the button on the controller it still moves an insane amount of water.
The surface area from the floss “mat”. Should be able to go 7-10 days before needing to be replaced. Also it allows me to have an overflow route in case it does fill up. This is in the back.

So the axis 40 is overkill for sure. I wanted the ai pump so I could have 5 minute intervals of adjusted flow through out the day. It can handle up to 40% fine. At those percentages it is dead silent. Also it was only a little bit more than the axis 20. I also just like AI products.

The air stone adds oxygen which helps to raise ph especially when combined with a co2 scrubber. This tank will be at a school so I have to keep a kid on it. I have one in my current desktop and it has seemed to help.
 
The surface area from the floss “mat”. Should be able to go 7-10 days before needing to be replaced. Also it allows me to have an overflow route in case it does fill up. This is in the back.

So the axis 40 is overkill for sure. I wanted the ai pump so I could have 5 minute intervals of adjusted flow through out the day. It can handle up to 40% fine. At those percentages it is dead silent. Also it was only a little bit more than the axis 20. I also just like AI products.

The air stone adds oxygen which helps to raise ph especially when combined with a co2 scrubber. This tank will be at a school so I have to keep a kid on it. I have one in my current desktop and it has seemed to help.

Interesting concept overall. Although I do understand where you are kinda coming from I feel like things are being complicated drastically for such a small water volume. Over the past 20yrs I have figured out the less you do,the better off the overall tank health is.

As for the PH,if you are using a quality salt and have decent surface agitation thats all you need. But if it works for you & the tank health do your thing boo boo.
 
As for the PH,if you are using a quality salt and have decent surface agitation thats all you need. But if it works for you & the tank health do your thing boo boo.
This is true in many cases. This tank will be in a classroom and have a lid. So even with good surface agitation (which the wave pump definitely adds too) there won’t be good gas exchange. My current desk tank maintained a pH of 7.5-7.8. Once I added a bubbler to a co2 scrubber, I have been able to keep it at 8 without dosing anything. That’s my goal with this desk tank. It needs to be able to go on its own with minimal effort on my part. It also has to be able to function on its on for 12-14 days twice a year. There is no way I can accomplish that with filter socks. I need to have an overflow for when it fills up and I am away.
 
That makes a heck of a lot more sense,now I'm picking up what you're putting down lol.

You are just swapping everything over to the 8g,and adding a few new gallons of water ?

With mine,I usually just run a sock when I am messing with the scape because its dusty and I didn't prerinse it lol. Then after a day or 2 I swap it for filter floss big enough to fit in the weir area,then every eh week,rotate the clean side to where the water goes over the weir if that makes sense.
 
You are just swapping everything over to the 8g,and adding a few new gallons of water ?
Most likely. I might try to sell off a rock that has a bunch of anemones on it. I haven’t completely made up my mind. I have of recently started to enjoy zoas more. I might change the scaping a bit. The funny thing is most of the additional volume is in the filter chamber. Width is the same. Display depth and height only increased by 1 inch each…. My plan is to use as much rock as I can and all bio media from the current tank. I only have a single damsel fish.

1750812487525.png
 
Everything is set up and I have ran the Axis 40 at 50% for over 24 hours with no major issues. I don’t plan to keep it there. The water is moving for sure! It will most likely stay at 30% with about 7 or 8 five minute bursts spread throughout the day. With the bare bottom, this should keep the detritus in suspension longer.

IMG_1686.jpeg
IMG_1687.jpeg


I should be adding rock and livestock this week depending what I am able to sell from my existing tank.
 
I had a wild hair, and decided to make the rock work more grand. I have to be able to move this tank a few times a year, so it has to be fixed. I took an extra caribsea arch I had, and cut it in half. I puttied them back together with the cut ends perpendicular to each other. Then fixed it to the tank with silicone. I am pleased with the outcome. I will take everything out of my quarantine tank tomorrow, re-glue some frags on the rock, and it will be back in business.
IMG_1706[1].JPG


IMG_1701[1].JPG


IMG_1703[1].JPG
 
Oooo, I love the new aquascape! Sorry about the hair algae outbreak!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 18 18.6%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.3%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.4%
  • I keep a backup of everything

    Votes: 25 25.8%
  • Other (Post in the comments)

    Votes: 7 7.2%
Back
Top
Home
Post thread…
Market
What's new