Neptunian Cube M Pro 60 Aquarium

Neptunian Cube M Pro 60 Aquarium​

Equipment List:​

Lighting
● Radion G4 Pro XR30
● Reefbrite XHO's (actinic)

Flow
● Powerhead Vortech MP40
● Return Pump TMC (4000)

Other
● Thermo Temperature Controller
● Versa Dosing Pump
● ATO - To be added, I won't be using the Neptunian ATO/Float valve mainly due to space in the sump.

Aquascape is complete, sand and water needs to be added to begin the cycling. Further updates to follow (hopefully bi-weekly)

 

[Peace River]

Nice! Congratulations on the new adventure!

 

[Reef_haus]

Nice! Congratulations on the new adventure!

Thank you

 

[Lee belk]

Neptunian Cube M Pro 60 Aquarium​

Equipment List:​

Lighting
● Radion G4 Pro XR30
● Reefbrite XHO's (actinic)

Flow
● Powerhead Vortech MP40
● Return Pump TMC (4000)

Other
● Thermo Temperature Controller
● Versa Dosing Pump
● ATO - To be added, I won't be using the Neptunian ATO/Float valve mainly due to space in the sump.

Aquascape is complete, sand and water needs to be added to begin the cycling. Further updates to follow (hopefully bi-weekly)

Did u have any problem with tiny air bubbles from the filter sock to the return I’m climbing the wall cos of it u don’t get any instructions other then the build of it and that’s minimal I’m done playing with the traps I’ve filled it to the brim with water switched it on and waited for them to go it’s like the flow is to fast but I’ve set the screw valve so water trickles down the clear pipe could u help me out please

 

[alonsooro]

Very cool setting, congrats!
It looks promising, SPS tank i guess?

BTW Do you have any shot from your sump?

 

[Uzair]

Hello, I am about to buy Neptune in MP 180 Pro, but one of my fellow hobbyists mentioned to me that if you need to clean your return flow area or if you get any pest infestation, like flatworms or even aptasia, how do you remove and clean it? That made me wonder because it makes sense. So, I wanted feedback from the community of people using Neptune M-Pro series.

 

[SFNanoReef]

Hello, I am about to buy Neptune in MP 180 Pro, but one of my fellow hobbyists mentioned to me that if you need to clean your return flow area or if you get any pest infestation, like flatworms or even aptasia, how do you remove and clean it? That made me wonder because it makes sense. So, I wanted feedback from the community of people using Neptune M-Pro series.

Most people don’t regularly clean their overflow box. That said, Neptunian Cube systems have been in use across Asia and Europe since 2018 with no widespread reports of clogged overflow chambers. The design also helps here—the overflow is coast-to-coast along the rear, and the bottom uses a two-piece glass construction to create a large chamber. There’s no traditional plumbing inside the overflow to clog.

This store will ship all over the US for a flat $150: https://aquariumshowusa.com/collections/neptunian

I’ll post picture of my S150