Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks!Broken video link!
Yes, I was breaking it in . It is going into my 200g reef with about 22 fish in and feeding 2x pellets and 3 to 4 frozen cubes per day, plus nori and Easy Reefs Mastik on weekends....and if you're doing this for break-in purposes, this skimmer doesn't need it! It produced a nice stiff foam head within minutes straight out of the box.
Now with youtube link
Many thanks for the reply. Regarding the air tubes, I would like to connect the air intake to my CO2 scrubber. Is it possible to detach the tubes from the body?Hi, thanks for your support. This is normal, as the water level in the chamber room is too high, while at the same time you almost closed the water outlet gate, so the water has nowhere to go, instead spill from the place above the water level adjustment dial. Please turn up the water outlet gate a little, so that it can lower the water level in the chamber.
Hi, thanks for your support, it is possible to detach the tubes from the body as is shown on below post:Many thanks for the reply. Regarding the air tubes, I would like to connect the air intake to my CO2 scrubber. Is it possible to detach the tubes from the body?
Also, PLEASE make an automatic neck cleaner and put me down for one
Hi, thanks for your support. This is normal, as the water level in the chamber room is too high, while at the same time you almost closed the water outlet gate, so the water has nowhere to go, instead spill from the place above the water level adjustment dial. Please turn up the water outlet gate a little, so that it can lower the water level in the chamber.
Hi do you mean there's water dripping from the part above the dial, right? Or could you send a small video to [email protected] We will check where the water is dripping.Hi, i was wondering if its normal during the break in period for the skimmer collection cup to be dripping from the seal area? I am getting drips on both sides right where the locking rings are when the cup is locked.
No, not from the dial. ill take some video tonight because I can't really explain but if I were to try again, its where the Collection cup meets the base, on the locking ring where the 2 clips you slide around to lock the cup. This is not my photo but i circled where its dripping fromHi do you mean there's water dripping from the part above the dial, right? Or could you send a small video to [email protected] We will check where the water is dripping.
Hi, noted and thanks, we will have a check after receiving your small video
Did that work for you? From the pics, it appears your skimmer is pulling fresh air from two places--one being from the skimmer intake and the other, off the T, from your scrubber?