- Joined
- Dec 2, 2019
- Messages
- 546
- Reaction score
- 497
I made little adjustments.
Is this the 110$ pack with different structures?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I made little adjustments.
I think that will work out great. Now is the time since it’s not wet yet. Drill some holes and seat the rods inside the rock and you’ve got a cool looking floating scape. I used the skinny plastic risers that come with innovative marine snapgrid to lift mine. I covered around the outside with rubble so it looks like Little Rock pillars. I wish I would have thought of using the clear acrylic rods, it would have saved me a lot of time gluing rubble to plastic legs.I found some 1/2” and 1/4” acrylic rods and super glue. I think I am going to use them instead of using PVC. I think I can put extra footing since they are smaller than 1” rods. What do you think?
Glue them to the bottom of the glass? Is that what you are asking?
Is this the 110$ pack with different structures?
I think that will work out great. Now is the time since it’s not wet yet. Drill some holes and seat the rods inside the rock and you’ve got a cool looking floating scape. I used the skinny plastic risers that come with innovative marine snapgrid to lift mine. I covered around the outside with rubble so it looks like Little Rock pillars. I wish I would have thought of using the clear acrylic rods, it would have saved me a lot of time gluing rubble to plastic legs.
I think the rods would be too skinny at the end to be able to glue to the rock surface well. I would think even just a half inch hole to insert the rods would provide a lot more stability and surface area for the glue to adhere. Or, maybe look into using some epoxy to attach the rods. That way you could build some up around the rod to make it stable?Yeah I just remembered that I have the rods and I think I better use them instead of using PVC. Question. Do I really need to drill the rock to insert the rods, or can I just super glue them to the bottom of the rocks?
That looks great. Can’t wait to see it in your tank.I did use drill and just use super glue. For non flat surface I used fauna Marin putty. My plan for the ones with superglue only, I am going to apply Nyos cement around the rods. I think it will hold since I used more rods than I need. What do you guys think?
Before:
After:
Nyos cement applied:
put in caribsea purple life rock and RODI water. Heater in and still at 72 F so far. Looking to get it to 78F. I am starting to mix the Tropic Marin salt in slowly. Skimmer is on.
My questions are:
-can I put in ammonia and Dr Tim’s now? Or should I wait until the temperature is reached and salinity is set to 1.0025 or 1.0026?
- can I leave the skimmer on during the whole cycle to break in?
I plan to leave the light off the whole time.
Thanks
Nice build thread. Enjoying the progress so far. I have a RSR250 as well. Just a few months ahead of you my tank is coming up on 1 year in a few weeks.
I would wait till you get your salinity up before adding the bacteria. Also, I would recommend a fishless cycle with some ammonia. Super simple and works really quickly. I do also suggest no lights for the first 2 months really stops algae growth. I didn't and it set me back early on with hair algae.
When added the salt into the tank I wouldn't bother with the skimmer. I have the same skimmer just a different sump. It breaks in pretty quickly. You can turn the skimmer on at when you start adding life to the tank (other than the bacteria).
I am sure either would probably work before or after adding salt. Just seems best to wait given they will be living in salt water. I would check the instructions on the bacteria too to see what it says. Remember to take things slow in this hobby.Is there a reason why I have to wait until the salinity is up to 35 ppt before adding bacteria? I understand that same bacteria exist in freshwater and I don't think they depends on the salinity level to thrive. I asked this question on the cycling thread and the OP didn't see an issue. Please share your thoughts.
I am not using any lights right now and will not be for a while. Maybe a couple of months after I added a fish.
I had the skimmer on for few days, but now I have it turned off completely since I added the bacteria already.
Please continue to share your tips
I am sure either would probably work before or after adding salt. Just seems best to wait given they will be living in salt water. I would check the instructions on the bacteria too to see what it says. Remember to take things slow in this hobby.
How are you adding food for the bacteria? Also are you planning to test during the cycle process? I did but I seen a lot of seasoned reefers just wait till they see coralline and or just test NO3 and PO4. Either works just need to give it time for everything to develop. Would be good to have an ammonia test kit too to ensure after you add your first fish that the bacteria can keep up with the new ammonia. Coralline could take a while too, I am a year in and just now starting to see good coralline despite being able to keep SPS for many months.
Now would also be a good time to create a fish stocking list. If you share we can give some tips. I added some more aggressive fish early on and should have waited. Best to start with less aggressive fish then move to more aggressive especially in a small tank like the RSR250. Also checked out the youtuber pelphey. He has a RSR250 too and posts videos regularly.
Good luck and have fun.
No such thing as too much bateria. If you have too much some will die off and your water might be cloudy for a bit. Mother nature will do her thing to balance things out. Unless you have money to burn don't bother with nitrite. I have a hanna one and only have used it a handful of times. Works great just no need anymore. Nitrate test kits are not always so accurate but good to test anyways, just keep that in mind. Hanna ultra low range phosephate test kit is the best hightly recommend that. Normally outside of GFO usage if you have high PO4 you will also have high NO3.I am using Dr Tims one and only and ammonia. I also bought Microbacter XLM, but did not end up using it. I thought I have Caribsea purple liferock already which contains dried bacteria and plus Dr Tims. I thought it will be too much bacteria during the cycle process. I am thinking of maybe using it when the cycle is over just to give a bit of boost.
I bought Ammonia and nitrate salifert test kit and I will be purchasing Phosphate hanna checker soon. I didn't plan to buy nitrite kit, but someone from the cycling thread said that sometime nitrite will show up as nitrate on nitrate test kit. Therefore, the only way to confirm if all nitrate is by confirming that there is no nitrite in the tank. So I guess I will be purchasing nitrite kit soon.
In term of fish and due to the size of the tank, I think I will need to prioritize on the utilitarian fish first. But I really like flame angels, pygmy and other dwarf angels. We will see.
No such thing as too much bateria. If you have too much some will die off and your water might be cloudy for a bit. Mother nature will do her thing to balance things out. Unless you have money to burn don't bother with nitrite. I have a hanna one and only have used it a handful of times. Works great just no need anymore. Nitrate test kits are not always so accurate but good to test anyways, just keep that in mind. Hanna ultra low range phosephate test kit is the best hightly recommend that. Normally outside of GFO usage if you have high PO4 you will also have high NO3.
Utilitarian fish are great highly recommended. My yellow tang is great. Tank is a little small for him but will probably upgrade in the next 2-3 years.