- Joined
- Oct 13, 2019
- Messages
- 1,139
- Reaction score
- 632
- Location
- Milwaukee
- What state or country do you live in
- Wisconsin
Alright, here is the filter setup I am planning, and the reasons why. I am curious is anybody has thoughts on anything I may have missed.
1 - The starting point is that all return water will flow through a filter roller. (200 micron)
2 - There is a protein skimmer before the return.
3 - A pump will feed a Chaeto Reactor at about 500gph
4 - The reactor will feed into a UV filter to sterilize bacteria and algae in the water. Roughly 4 foot UV.
5 - Carbon reactor after the UV filter to remove DOCs from the macro algae that may reduce hard coral growth. Bonus is that it catches everything else too. (Combination of bitominous and ROX 0.8 carbon)
6 - Added chamber for GFO as needed (typically will be empty or run more carbon)
7 - Water is returned to the sump before the skimmer.
Some other thoughts are:
1: filling the base of the sump with live rock and/or a deep sand bed.
2: remote deep sand bed
3: sulfer reactor
What are the general thoughts? Am I missing anything? Are any of these extra items more important than I am thinking?
Current Setup:
1- NO Filter socks or rollers...
2- Protein Skimmer
3- Carbon filter as needed
1 - The starting point is that all return water will flow through a filter roller. (200 micron)
2 - There is a protein skimmer before the return.
3 - A pump will feed a Chaeto Reactor at about 500gph
4 - The reactor will feed into a UV filter to sterilize bacteria and algae in the water. Roughly 4 foot UV.
5 - Carbon reactor after the UV filter to remove DOCs from the macro algae that may reduce hard coral growth. Bonus is that it catches everything else too. (Combination of bitominous and ROX 0.8 carbon)
6 - Added chamber for GFO as needed (typically will be empty or run more carbon)
7 - Water is returned to the sump before the skimmer.
Some other thoughts are:
1: filling the base of the sump with live rock and/or a deep sand bed.
2: remote deep sand bed
3: sulfer reactor
What are the general thoughts? Am I missing anything? Are any of these extra items more important than I am thinking?
Current Setup:
1- NO Filter socks or rollers...
2- Protein Skimmer
3- Carbon filter as needed