New Home - New Build

[ReefKeeperElite]

Moved and had to retire the RSR 750 XXL and sell off all livestock. Didn’t want to, but was the best decision IMO, rather than deal with the hassle and potential complications of relocating the reef.

A RSR 525 G3 is on the way, and would like to log progress here of building it, setting up the equipment, and getting the reef thriving again.

All I’ve got done so far is the setup of the RODI system, RODI and SW storage tanks, and getting a QT established (look familiar?). Attached are the storage tanks and a pano of the reef room.

Lines for RODI, SW, and air will be fed through the wall from garage to adjacent reef room, just as in my old 750 XXL build.

Looking forward to sharing progress!

 

[Gumbies R Us]

Following along!

 

[ReefKeeperElite]

525 not here yet, so continue to get the QT ready. Cleaned and rinsed with white vinegar and RODI. Leak checking now.

Also built this cover/side using two 2x2 egg crates from BRS, and a hot knife, secured with zip ties.

Plan is to get an angel and a couple tangs going in QT (2 month process), whilst building the 525.

 

[ReefKeeperElite]

QT is setup. Borrowing my left controller cabinet from my DT to control the pumps, lighting, temp, and probes. The 525 has yet to arrive.

Running a little carbon in the Reefmat basket to remove any possible toxins introduced by the move.

Will remove the carbon and start the quarantine process in a week, starting by gradually raising copper to 1.0.

Plan is to get the fish a week later and continue with the quarantine process.

 

[ReefKeeperElite]

Well despite placing my order for the 525 immediately after the Memorial Day sale was announced, the fine folks at @Bulk Reef Supply have said they never had any inventory to fulfill my order. I spoke with customer service who said they have system issues and can't accurately show stock on hand. It only took them 3 weeks to let me know, geeez! Needless to say, this project will be delayed.

 

[ReefKeeperElite]

It’s finally here! Just finished inspecting, and it’s all good. Many thanks to @Bulk Reef Supply for their help and understanding with the Red Sea fulfillment process, and getting the tank to me as soon as they could. Now begins the fun part!

 

[ReefKeeperElite]

Ready to tank! Will do that over the weekend with my super strong daughter

 

[Desert•Reefer]

Cant wait to see!

 

[JumboShrimp]

Love the horizontal-leg water tanks. (Are you sure the middle shelf will hold the weight?)

 

[ReefKeeperElite]

Yes, I did this with my last tank too. Stable for 6+ years. I put 3 2x4 planks in between two shelf units just to be extra safe. Did this for both storage units (RODI and SW).

 

[BoxH]

Moved and had to retire the RSR 750 XXL and sell off all livestock. Didn’t want to, but was the best decision IMO, rather than deal with the hassle and potential complications of relocating the reef.

A RSR 525 G3 is on the way, and would like to log progress here of building it, setting up the equipment, and getting the reef thriving again.

All I’ve got done so far is the setup of the RODI system, RODI and SW storage tanks, and getting a QT established (look familiar?). Attached are the storage tanks and a pano of the reef room.

Lines for RODI, SW, and air will be fed through the wall from garage to adjacent reef room, just as in my old 750 XXL build.

Looking forward to sharing progress!

Good work, following along

 

[ReefKeeperElite]

Tank installed and centered, big day! Feels good to get that out of the way. Time to move on with the instructions, the leveling step. But this enough for today. Time to take a break and celebrate!