New Jellyfish Tank

Chocka

Active Member
View Badges
Joined
Mar 14, 2025
Messages
106
Reaction score
82
Location
McHenry
What state or country do you live in
Illinois
Rating - 0%
0   0   0
Good day to all,
I am attempting a different type of build to go with the rest of my Marine household. I am building a fully functional (hopefully) pretty hands off jellyfish display tank in the entranceway that should only require some pretty basic maintenance once a week or bi-weekly if I get it right. I do have a 5 gallon Jellyfish Art tank that has been up and running for quite a while about 6 months and they are doing great but they have grown some and it is getting crowded in that tank for 5 jellyfish. I am going with the Ocean Ring 287 Liter (75.8 gallon) self contained ring. I intend to keep about 15 Jellyfish (Moon Jellies various sizes)

OceanRing-287L.jpg


Existing Jellyfish (Green pic is when they were new, you can see how much they have grown in the feeding video below)
20260628_070128.jpg


Feeding Video



I have built the stand, added power with 4 smart outlets that will control the functions I am going to do. My tank is on backorder for 6 weeks so getting the rest done while I wait anyway here is where it stands today.

Built the stand this week all aluminum
2962.jpg
2964.jpg

2980.jpg


I built in the power strip with 4 of them being Govee smart switches that I can program and wired in some under cabinet lights from Harbor Freight

2969.jpg
2970.jpg

2978.jpg


Installed a GFCI outlet as always for safety reasons

2971.jpg


I have a 36 inch piece of 40-4040 T slot profile that is going to go across the back to support 12 x 8 metal shelf that my GHL 2.2 Maxi Doser will sit perched right above the Antartic Star 10 L mini fridge that will house my Vevor magnetic stirrer and Icecap 1500 ml doser container. I am drilling a hole in the top with a grommet feeding right to the dosing container and one in the bottom side for the power cable.

2975.jpg
2977.jpg
2979.jpg
20260926_163823.jpg


I am going to be feeding them twice a day automatically using the refrigerated Brightwell Jelliplanktos M at a morning dose of 3.8 ml and one 10 hours later at the same 3.8 ml. I will be skipping a dose 3 to 4 times weekly and giving them live brine instead of the Jelliplanktos. The plan is to program several switches to do the following:

7:58 AM Stirrer turns on for 2 minutes then off 8:00 AM
8:00 AM GHL doser sends 3.8 ml of feed into the return section of my ring tank.
8:01 AM Return pump turns off (feed is now in tank)
8:01 AM GHL doser returns feed still in line to the dosing container in the mini fridge
8:25 AM Return pump turns back on and tank runs as normal

Same as above begins again at 5:58 PM

Several times a week I simply go into the app and tell it to skip a dose and feed them live brine I will raise in my 2 L hatchery downstairs in my fishlab as right now I am just using 2 of the dish type hatcheries to feed them

2982.jpg
2983.jpg


1500 ml of Jelliplanktos M from Brightwell direct is about 74 dollars and should last me about 28 weeks. I buy my 90% hatch rate brine shrimp eggs from Aquarium Co-op so about 50 dollars for 200 grams should last almost all year. I have calculated water changes out for this tank to require 2 maybe 3 boxes of salt at 74 dollars a box for the year. Moon Jellies treated right can easily live 18 to 24 months and will need a plan to replace probably 8 or so per year at a cost of around 180 dollars a year shipped. All told Jellyfish year round in this tank should cost me around 45 dollars per month ( electricity not included but draw is minimal so 10 to 15 dollars per month) with electric included probably around 55 or 60 dollars per month. The nice thing is Jellies do not require a heater they do quite well at ambient anywhere from 60 degrees to around 78 is fine for them. Wish me luck and goodwill hopefully I can report back some positive results once up and established for a little while.
Chocka

2978.jpg
 
Last edited:
Thought about building out one of these cylinder tanks from Pro star cylinder tanks for my build but it was just going to be way too much work as it really does not have proper flow, return etc. and I would probably end up shredding them did some research and came to this one here from a obviously chinese manufacturer Cherry but I like what I see in this one and can work with that might even try to incorporate their nozzles for a chiller into a bio cylinder of some type to supercharge keeping ammonia at bay which is the absolute killer of a 95 percent water invertibrate. Have high hopes for what I am doing tempered with the possibility of failure but won't know if you don't try right?

https://www.saltwateraquarium.com/p...rium-w-black-stand-pro-clear-aquatic-systems/
 
I will be selling that when the transfer occurs probably around thanksgiving
 
Last edited:
Very nice craftsmanship with your wood work. For certain, you have done much automation for assisting you with expert level delicate invertebrates.
Kudos to you.

I first saw a jellyfish exhibit at Montaray Bay aquarium 25 years ago. It was awesome to stand in a room with a circular tank around and above you.
 
There is a pic in their repertoire that I saw with jellies and they should really be ashamed of that Pic as if you put jellies in that tank as is, you will shred them like a lawnmower know what your doing before you do it is my motto and I still fail we all do but I personally am thankful for those who try 😉 God bless you individuals. As a responsible company design a similar tank that is safe, it needs several modifications but offer it as an alternative instead of acting like this one will work because you know it will not. The old don't be dick its really not that hard to figure that out to the benefit of our planet
 
Last edited:
bump
 
Last edited:

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 15 21.4%
  • Powerheads or wavemakers

    Votes: 5 7.1%
  • Sump or rear filtration chambers

    Votes: 9 12.9%
  • Skimmer or other filtration equipment

    Votes: 9 12.9%
  • Overflow or plumbing

    Votes: 12 17.1%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 19 27.1%
  • Other—tell us what I missed

    Votes: 1 1.4%
Back
Top
Home
Post thread…
Market
What's new