New Toy

  • Thread starter Thread starter Dowtish
  • Start date Start date
  • Tagged users Tagged users None
Oh yea new toys!!


Sent Via the R2R Forum APP
 
Chris,

I got mine all programmed and was monitoring it last night to make sure it was doing what it is supposed to be doing before hooking it up to the aquarium. I've go some good codes written for the dosing pumps that will dose every hour for 3 minutes during the day for calcium and 3 minutes every hour at night for alkalinity.
I also setup some feed timers both for feeding purposes and for maintenance. During maintenance I have the program turn on the light under the stand, turn off the heaters and skimmer for one hour.
I haven't hooked it up to the wireless network yet, but hopefully that will come in the next few days.

Ryan, how many mls are you dosing of each?

Sent Via the R2R Forum APP
 
Currently 30 minutes of CAL so about 33ml's and 40 minutes of ALK so about 44ml's... Got the CAL program that runs for 10 hours and the ALK program runs for 9 hours.

I need to adjust my ALK program as I tested the ALK yesterday and it was 7. I'd like to get it back up closer to 8 so I added 10 minutes to my timer from 30 to 40 minutes now. I haven't adjusted the apex program yet though...
 
shouldnt you manually raise it to 8 and use the dosers to maintain? or is that your plan
 
I want to raise it slowly so I'll let the doser do the work. Plus I'm doing a WC in 2 days so no need to be too drastic about it.
It was maintaining well for the past few months then all of a sudden dropped. I knew something was weird because my telltale purple monti started to bleach.


Sent Via my iToaster 5
 
Currently 30 minutes of CAL so about 33ml's and 40 minutes of ALK so about 44ml's... Got the CAL program that runs for 10 hours and the ALK program runs for 9 hours.

I need to adjust my ALK program as I tested the ALK yesterday and it was 7. I'd like to get it back up closer to 8 so I added 10 minutes to my timer from 30 to 40 minutes now. I haven't adjusted the apex program yet though...

Have you seen the apex dosing calculator spreadsheet? look under 'tools' on the right side of the page.

Reeftronics
 
I downloaded the iPhone app to check that out. The app supports custom port numbers for HTTP. I will highly suggest changing the public facing port to something else. This is called a PAT port. We set that to a random number, lets say 45129. We open the firewall and forward this to port 80. I wouldn't change it on the Apex. Also I would suggest changing any default usernames and passwords on that device (and routers too).

Also if you guys want to get something a bit easier to track. Check into http://www.noip.com or any other free Dynamic DNS Service. You'll be able to have a true domain name and not worry about your ISP changing your public IP address.

You could point your Apex to http://my controller.domain.com:45129

Pretty cool stuff.

Contact for rates lol


From my iDevice
 
I have android. But its the same deal as you described.

Sent Via the R2R Forum APP
 
I have android. But its the same deal as you described.

Sent Via the R2R Forum APP

Just downloaded it on my droid now. The droid app looks to be a little nicer. Not sure why the SSID is in there, but on the droid you have host and WAN which will be nice. You'll only need a single controller added. The iPhone looks like you'll need 2.


From my iDevice
 
I got an Apex for Xmas. I got all the web stuff set up for it, but haven't had time to actually install it. I really don't know how difficult it's going to be to program the different ports. Was it pretty easy to do? Computer programming isn't my forte....
 
I downloaded the iPhone app to check that out. The app supports custom port numbers for HTTP. I will highly suggest changing the public facing port to something else. This is called a PAT port. We set that to a random number, lets say 45129. We open the firewall and forward this to port 80. I wouldn't change it on the Apex. Also I would suggest changing any default usernames and passwords on that device (and routers too).

Also if you guys want to get something a bit easier to track. Check into http://www.noip.com or any other free Dynamic DNS Service. You'll be able to have a true domain name and not worry about your ISP changing your public IP address.

You could point your Apex to http://my controller.domain.com:45129

Pretty cool stuff.

Contact for rates lol


From my iDevice

What??? Lol. This is why you are coming over tomorrow! Want me to fix you car? Sure! Want to talk computer talk to me! Negative!


Sent Via the R2R Forum APP on my Panini Maker.
 
What??? Lol. This is why you are coming over tomorrow! Want me to fix you car? Sure! Want to talk computer talk to me! Negative!


Sent Via the R2R Forum APP on my Panini Maker.

haha, I can man. We just knocked out Chris'...actually ran a train on it after the netgear adapter decided to join the party.
 
Chris should I allow him in my house tomorrow??? Lol

ImageUploadedByReef2Reef Aquarium Forum1364530718.986330.jpg


Monitoring my programs now. Messing with the temp probe to make sure all my settings are correct.


Sent Via my iToaster 5
 
Absolutely. Josh is the man. Even if he refers to accomplishments in a suggestive weird way.

Seriously though. He was able to troubleshoot and configure everything from his house. Pretty awesome.
 
Cool. Lets see a screenshot from your mobile device!


Sent Via the R2R Forum APP on my Panini Maker.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 2.9%
  • I decorate AROUND the tank or stand

    Votes: 4 11.8%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 25 73.5%
  • We don’t decorate for the holidays

    Votes: 4 11.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new