New Water Station Build...

  • Thread starter Thread starter Dom
  • Start date Start date
  • Tagged users Tagged users None

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,881
Reaction score
8,329
Location
NY
Rating - 0%
0   0   0
It all began when I decided it was time to change the media in my 5 stage RODI. Once replaced, I decided to make it part of a water station build...

IMG_6502.JPG
IMG_6503.JPG

This is the stand I built for the water tank. I've mounted my RODI under it. The RODI is mounted to a piece of 3/4 ply and then using 2 screws, mounted it to the stand. This makes it easy to pull out, when the time comes to replace media again.




IMG_6504.JPG
IMG_6505.JPG

This cool little valve was installed off the RODI good water output. I found that sometimes, you need to run a gallon or two through to get a ZERO reading. The blue hose is what is diverted into a waste bucket and the clear hose is what goes to the float inside the tank. I switch the valve to put water in the tank once the in line TDS meter reads ZERO


IMG_6506.JPG
IMG_6507.JPG
IMG_6508.JPG


Some pictures for your viewing pleasure....



IMG_6510.JPG

Internal float valve in the "tank" (40 gallon brute).

IMG_6511.JPG
IMG_6512.JPG
IMG_6513.JPG



This is a 1/4 inch bulkhead from BRS. It is designed for "dry applications" and does not include a gasket. From a box of assorted washers, I found a gasket that fit and installed it as a supply to the float valves in my sumps. That's right a 40 gallon, gravity fed ATO. LOL


IMG_6514.JPG
IMG_6515.JPG


Some more photos for your viewing pleasure. IMG_6509.JPG
 
Dom, the only thing different I would have done is mounted the RO/DI unit on the side to allow me to service the cartridges. Other than that, thumbs up!
 
Dom, the only thing different I would have done is mounted the RO/DI unit on the side to allow me to service the cartridges. Other than that, thumbs up!

I thought about that. But I felt it looked sloppy.

But now that I think of it, I could pull them from the back of the stand to the front. This would make them accessible for service. Next time I pull it out to swap media.

Thanks for the suggestion!
 
Really nice work! This looks solid and seems like it will be very functional!
 
Really nice work! This looks solid and seems like it will be very functional!

Thank you. Yes; it isn't as pretty as some you see here. But I wanted to be economical without sacrificing functionality.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 9.5%
  • Lighting, pumps, or other major equipment

    Votes: 3 14.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 9.5%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 9.5%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 23.8%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.8%
  • I’m browsing, but don’t have a specific target

    Votes: 4 19.0%
  • I’m not shopping for reef deals this year

    Votes: 1 4.8%
  • Other (Post in the comments)

    Votes: 1 4.8%
Back
Top
Home
Post thread…
Market
What's new