Noob Asks Dumb Question About Sump Level

  • Thread starter Thread starter FishLvR
  • Start date Start date
  • Tagged users Tagged users None

FishLvR

Kiss My Wrasse
View Badges
Joined
Nov 23, 2015
Messages
1,537
Reaction score
1,877
Location
Inland Northwest
Rating - 0%
0   0   0
Been in the hobby forever but never had a sump. AIO gang jumped me out. I stopped wearing their colors I guess.

So the aquarium is tuned to perfection. Quieter than a mouse fart. I have a concern though. None of my equipment is on yet, skimmer, algae scrubber, and reactor. Waiting for the ugly stage to start them. My sump has water moving, obviously, but the last chamber is getting a nice stagnant top.

Here is where my lack of brains and self awareness start. Can I lower the water in return pump chamber? Can I pull water out of that chamber and the level of the tank stays the same? I have a photo for reference. An added bonus will be if the pump shuts off it will allow for more room in the sump for the overflow water. It will just reach the rim if I lose power. It takes the generator about 35 seconds to kick on I think. I don't lose power often but some yahoo kid throws his dang tennis shoes over the dang line or some squirrel grounds himself to the power pole. Also, Thompson behind me has been stealing internet by tapping right into the line.

I think removing water from that chamber will help the water move a bit more and allow for more margin of error if I loose power.

sumplevel.jpg
 
If you remove any water from your system it’s the return pump chamber that will have the water level fluctuate. Remember that you will have to adjust your ATO sensor otherwise your ATO will just replace the removed water with fresh water.
 
Can I lower the water in return pump chamber? Can I pull water out of that chamber and the level of the tank stays the same?
Yes and yes.
The water line in your tank is determined by the placement of the weir/overflow. The tank level won't vary unless something drastic happens (you remove too much water or your drains all clog)

It also looks like the level in the sump is too high to begin with so removing some is a good idea. You can tell because the water level is above the weir on both sides (the side with the scrubber and the side with the sponge).

I like having lots of "overhead space" to make sure there's no flood when the power goes out.
 
If you remove any water from your system it’s the return pump chamber that will have the water level fluctuate. Remember that you will have to adjust your ATO sensor otherwise your ATO will just replace the removed water with fresh water.
I like how you took me for my word how dumb I am. ;)
 
So I lowered it. It helped flow a tiny bit. Any lower then the weir was not taking in water, so this is as low as I could get it. Almost like an old trickle filter now. I might shove some floss in there one day or not. Thompson told me he would get me free HBO if I pretended to be his girlfriend at his uncle cousin's wedding. I told him no way I'm more of a showtime girl myself.

1000004823.jpg
 

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 40 58.8%
  • Automated dosing

    Votes: 5 7.4%
  • Mechanical filtration / roller filter

    Votes: 4 5.9%
  • Automated water testing

    Votes: 3 4.4%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 9 13.2%
  • Controller and remote monitoring

    Votes: 3 4.4%
  • Leak detection and emergency shutoff

    Votes: 1 1.5%
  • Automatic water changes

    Votes: 2 2.9%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new