NPT to PVC adapter?

[b4tn]

I am building a salt mixing station and re purposing my Sicce pump. It has threaded Female 3/4" NPT inlet and outlet. I want to mate the pump to 3/4" PVC sch 40. Is there a better way to do this other than using a threaded barb on the pump to a flex line to a barb glued into the PVC? See the links below to the barbs.

http://www.bulkreefsupply.com/sched...hread-1-4b880d619bbbcbbea22b13bfa30a1ace.html

http://www.bulkreefsupply.com/gray-male-pipe-adapter-spigot-x-barb.html

What is the correct terminology for a threaded 3/4"NPT to PVC adapter?

 

[BMW540]

http://m.homedepot.com/p/3-4-in-CPVC-CTS-Slip-x-MPT-Male-Adapter-C4704HD34/100347148

 

[120reefkeeper]

http://www.pvcfittingsonline.com/43...adapter.html?gclid=CM7AwL_h6c4CFQaNaQodbYMCEA


Most big box retail hardware stores will have what you need. Female thread on one side and slip on the other.

3/4 female pvc to slip coupling.


Or if you need the male end...

http://www.pvcfittingsonline.com/43...adapter.html?gclid=CJ7_g6Pi6c4CFZSGaQodNzIFwA

Again most big box stores will have it. [emoji4]

 

[120reefkeeper]

Wasn't for sure if your pump was male or female so I showed you both variations.

 

[cromag27]

3/4" mpt x 3/4" pvc pipe female adapter.

 

[b4tn]

That is what I was looking for! Pump is Female.

 

[AZDesertRat]

In the plumbing industry they are called male adapters and female adapters.