OceanRevive Arctic T247 question

[Summer4infinity]

I changed the lighting times on my ocean revive light. When I was in programming it my lights dimmed. They still say that they are set to 50% whites, 80% blues, but the light is definitely not bright like it was before. Has anyone ever run into this? I'm not sure if it was because of something I did wrong, or if the light is going bad.

 

[MikeyAl]

Whenever you change anything, go through all the channels settings, on/off, intensity, all the way through to "clock". You don't need to change anything, but if you don't complete the process, the changes won't take.

 

[MonsterReef]

50% whites are really high

 

[MikeyAl]

I changed the lighting times on my ocean revive light. When I was in programming it my lights dimmed. They still say that they are set to 50% whites, 80% blues, but the light is definitely not bright like it was before. Has anyone ever run into this? I'm not sure if it was because of something I did wrong, or if the light is going bad.

pM me if you need any help
Mike

 

[Summer4infinity]

Whenever you change anything, go through all the channels settings, on/off, intensity, all the way through to "clock". You don't need to change anything, but if you don't complete the process, the changes won't take.

Thank you! That appears to have done the trick. I appreciate your help!! : )

 

[Summer4infinity]

50% whites are really high

I was going by what the factory rep replied when asked for recommendations on that light. What do you run yours at?

 

[MikeyAl]

I was going by what the factory rep replied when asked for recommendations on that light. What do you run yours at?

I currently have mine at 60/20. I don't have any SPS. I am ramping up a little each week with a goal of 80/25.

 

[Summer4infinity]

I currently have mine at 60/20. I don't have any SPS. I am ramping up a little each week with a goal of 80/25.

Mine is a mix of a little of nearly everything, except NPS. Because of the way the light stand & tank stand were built (and to help cover the 30 X 30" space) my light is 16" above the water though too. I'm thinking of adding a couple of T5's to help the darker areas.