Overflow box help/ input

  • Thread starter Thread starter Westoncase
  • Start date Start date
  • Tagged users Tagged users None

Westoncase

Active Member
View Badges
Joined
Mar 19, 2019
Messages
275
Reaction score
182
What state or country do you live in
North Carolina
Rating - 0%
0   0   0
0D534006-4275-416E-9F35-535B601D040E.png
Does anyone have any experience with this overflow or have a good suggestion for an overflow box? Tank is a 40 breeder
 
The weir teeth on those Eshopps Eclipse overflow boxes are cut fairly deep, so if the holes aren’t drilled high enough, the waterline will show beneath the tank trim on rimmed tanks. Drilling high enough often doesn’t work as the exterior box is impeded by the exterior trim. Take a look at Modular Marine overflows. They are built with a notched rear external box to accommodate the tank trim so you can mount it high enough to hide the waterline behind the tank trim.

I use their 1200 gph overflow box on my tank. Their standard 1200 gph overflow is set up for 3/4” plumbing using uniseals. I had mine upgraded to 1” plumbing using 1” bulkheads. Here it is installed on my tank, which is a 57 gallon rimless. It has the same footprint as a 40 breeder at 36x18.

https://modularmarine.com/collectio...-low-profile-overflow-box-with-removable-weir
63EF24DF-E815-446B-8901-8B9060883C60.jpeg
 
The weir teeth on those Eshopps Eclipse overflow boxes are cut fairly deep, so if the holes aren’t drilled high enough, the waterline will show beneath the tank trim on rimmed tanks. Drilling high enough often doesn’t work as the exterior box is impeded by the exterior trim. Take a look at Modular Marine overflows. They are built with a notched rear external box to accommodate the tank trim so you can mount it high enough to hide the waterline behind the tank trim.

I use their 1200 gph overflow box on my tank. Their standard 1200 gph overflow is set up for 3/4” plumbing using uniseals. I had mine upgraded to 1” plumbing using 1” bulkheads. Here it is installed on my tank, which is a 57 gallon rimless. It has the same footprint as a 40 breeder at 36x18.

https://modularmarine.com/collectio...-low-profile-overflow-box-with-removable-weir
63EF24DF-E815-446B-8901-8B9060883C60.jpeg
The waterline being seen was a point of concern. Ive seen where people used the template on the inside and drilled from the inside of the tank. I’m worried about the trim on the outside. Ill check out modular marine overflows now.
 
The work around for the deep cut teeth on the Eshopps Eclipse overflow is to solvent weld an acrylic strip on the inside of the weir box to shorten up the teeth.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new