- Joined
- Mar 19, 2019
- Messages
- 275
- Reaction score
- 182
- What state or country do you live in
- North Carolina
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The waterline being seen was a point of concern. Ive seen where people used the template on the inside and drilled from the inside of the tank. I’m worried about the trim on the outside. Ill check out modular marine overflows now.The weir teeth on those Eshopps Eclipse overflow boxes are cut fairly deep, so if the holes aren’t drilled high enough, the waterline will show beneath the tank trim on rimmed tanks. Drilling high enough often doesn’t work as the exterior box is impeded by the exterior trim. Take a look at Modular Marine overflows. They are built with a notched rear external box to accommodate the tank trim so you can mount it high enough to hide the waterline behind the tank trim.
I use their 1200 gph overflow box on my tank. Their standard 1200 gph overflow is set up for 3/4” plumbing using uniseals. I had mine upgraded to 1” plumbing using 1” bulkheads. Here it is installed on my tank, which is a 57 gallon rimless. It has the same footprint as a 40 breeder at 36x18.
https://modularmarine.com/collectio...-low-profile-overflow-box-with-removable-weir
![]()