Parameters look off

  • Thread starter Thread starter Jayreef23
  • Start date Start date
  • Tagged users Tagged users None

Jayreef23

Active Member
View Badges
Joined
Nov 18, 2019
Messages
136
Reaction score
40
What state or country do you live in
Florida
Rating - 0%
0   0   0
So things in my tank weren’t looking too good so I got my water tested at my LFS
This is the results:
500 Calcium
7 Alkalinity
5.0 Nitrate
0.5 Phospate
7.4 PH
1.030 Salinity

what should I do?
 
So things in my tank weren’t looking too good so I got my water tested at my LFS
This is the results:
500 Calcium
7 Alkalinity
5.0 Nitrate
0.5 Phospate
7.4 PH
1.030 Salinity

what should I do?
Calcium seems to be high alkalinity low. I would check magnesium too based on this. My bet that it is off too.
depending of the age of your tank probably I would do some water changes to correct it.
Do you dose anything?
 
Calcium seems to be high alkalinity low. I would check magnesium too based on this. My bet that it is off too.
depending of the age of your tank probably I would do some water changes to correct it.
Do you dose anything?
I dose Calcium and Alkalinity and Red Sea Reef Energy
 
I dose Calcium and Alkalinity and Red Sea Reef Energy
Well you have to tune this a bit then. Less calcium ideal between 350-450ppm and alkalinity should be 8-9dkh
Alkalinity drops if magnesium is off. It should be 1200-1350ppm.

also high calcium drops alkalinity too
 
Last edited:
Well you have to tune this a bit then. Less calcium ideal between 350-450ppm and alkalinity should be 8-9dkh
Alkalinity drops if magnesium is off. It should be 1200-1350ppm.

also high calcium drops alkalinity too
Alright Thanks I’ll try to fix it
 
pH is in the danger zone - 7.7 should be your lowest acceptable level.

keep in mind that pH scale is logarithmic - each 1 increase/decrease is a 10x change in concentration - that means a drop from 7.7 to 7.4 is about a 50% decrease in the "good stuff" that pH provides to corals.

Hopefully once you increase your alk to 8-9 it will address the pH. if not, then you have other underlying problems such as high co2 content.

7.7pH should be the minimum for corals but even at those levels, most except for the hardiest stony corals and soft corals will deteriorate over a long term. Generally, 7.9 - 8.1 is the recommended "acceptable" level for stony corals and for ones that want to target the best health/growth, they maintain a pH of 8.3.

There is a right way and wrong way to address your pH problem. I'd recommend starting wit these two articles and do more research afterwards based on what may be specifically causing your pH issue.

http://www.reefkeeping.com/issues/2004-09/rhf/
http://reefkeeping.com/issues/2006-06/rhf/index.php
 
Meant to ask which critters or corals look off and how
 
Two small red flags for me. 1. Local fish stores usually use the cheap and often times less accurate API test. So if you can invest in a Salifert or Red Sea test kit soon. I promise you’ll have different numbers. Secondly re: salinity of 500, your salt that you use may very well be at or near that number. I know that Instant Ocean is 490 (I’m pretty sure) . Best of luck. :)
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 24.5%
  • I’d trust someone who knows my tank to choose

    Votes: 9 8.5%
  • I’d rather get a gift card and pick it myself

    Votes: 43 40.6%
  • I’d prefer gear or supplies instead

    Votes: 2 1.9%
  • Please don’t surprise me with livestock

    Votes: 26 24.5%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new