Peninsula Gyres

  • Thread starter Thread starter e34stx
  • Start date Start date
  • Tagged users Tagged users None

e34stx

Active Member
View Badges
Joined
Sep 5, 2017
Messages
204
Reaction score
56
What state or country do you live in
Rating - 0%
0   0   0
Good Morning everyone,
i have a 500L bare bottom mixed reef peninsula and trying tp play with the flow. my current setup is 1x gyre at the top near the over flow and 2x gyres mounted verically on each back wall by the side of the overflow. im wondering if its best to remove the vertical ones and position them both on the overflow. so one at the top and one at the bottom? the bottom unit blasts detritus of the bottom glass. at tnight i could turn the top one off so the reverse gyre encourages waste to go in the overflow. has anyone had or gt a simalar setup?
thanks
 
this is my current gyre setup.
20190613_125443.jpg
 
I have 2 Gyre XF250's and 2 MP40's on my 5' Reefer 650 peninsula. All were on the back (overflow side) glass with the XF250's vertical until today when I moved 1 of the XF250's to the overflow horizontal like your setup. (I wasn't happy with the dead zone on the last foot of the tank.) I am considering putting the other X250 on the bottom of the overflow as you mentioned. Did you ever do this? Curious to see what you think of this setup.
 
I have 2 Gyre XF250's and 2 MP40's on my 5' Reefer 650 peninsula. All were on the back (overflow side) glass with the XF250's vertical until today when I moved 1 of the XF250's to the overflow horizontal like your setup. (I wasn't happy with the dead zone on the last foot of the tank.) I am considering putting the other X250 on the bottom of the overflow as you mentioned. Did you ever do this? Curious to see what you think of this setup.

Hi yes i now have one 350 at the top and one at the bottom. i set them to offset antisync gyre mode and it works great. i have them just anti sync periodically for 40mins at 100% for 1 min each way. this pushs all the detritis to the lower one when its off and when it start it just obliterates the det and reverse cycles it to the overflow.
regards
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new