Michael Hughes
Well-Known Member
- Joined
- Oct 27, 2024
- Messages
- 517
- Reaction score
- 672
- Location
- Florida
- What state or country do you live in
- Florida
Just bought a used 125 gallon tank that I believe to be a Marineland Perfecto model since it has a single top center brace instead of 2.
These overflows seem a bit odd to me, as the side panels are transparent glass. Does this look like a custom/DIY overflow design?
In the pic below there are only two holes - the others are reflections.
If you know what model this is please chime in so I can find flow rates, etc. (I know I can calculate them based on the weir teeth if needed).
I'm thinking I could plumb this with a full siphon on the left along with a trickle/wet drain, and then a return on the right along with a dry emergency drain. Thoughts?
These overflows seem a bit odd to me, as the side panels are transparent glass. Does this look like a custom/DIY overflow design?
In the pic below there are only two holes - the others are reflections.
If you know what model this is please chime in so I can find flow rates, etc. (I know I can calculate them based on the weir teeth if needed).
I'm thinking I could plumb this with a full siphon on the left along with a trickle/wet drain, and then a return on the right along with a dry emergency drain. Thoughts?
