Perseverance Reef

[tbrown]

 

[Fishy888]

I'm thinking 35 seems high and it shouldn't fluctuate that much. What TDS meter are you using? Have you run any other tests on the treated water and are you running the waste to the drain or where's the waste going?

The waste is going into the sink and I’m filling a bucket with product water. I’m using the HM meter BRS ships with the value plus 4 stage.

 

[tbrown]

Depending on how much "fun" you want, you can always invite @Eagle_Steve or even @crusso1993 ... @crusso1993 likes bringing the shenanigans. Also @Stang67 needs to be invited if she hasn't been yet.

 

[tbrown]

Has @Sean Clark been invited?

 

[That Crusso Kid]

What, prae tell, is going on over here? @Fishy888 , you’re about to find out how much @tbrown3589 likes you as he invited me to your thread!

 

[fishguy242]

you need to run and waste at least 3-5 gal of "good" water until you have an idea on a used unit membrane ... ;)
already dropped to 9 before di ? correct ??
what about after di ?

 

[tbrown]

What, prae tell, is going on over here? @Fishy888 , you’re about to find out how much @tbrown3589 likes you as he invited me to your thread!

He said he wanted his thread livened up some. I figured you like having fun.

 

[Fishy888]

you need to run and waste at least 3-5 gal of "good" water until you have an idea on a used unit membrane ... ;)
already dropped to 9 before di ? correct ??
what about after di ?

That is after DI. I’ve only made 2.5 gallons so far. The TDS is down to about 6. It may be a water pressure thing though because the the product water isn’t a constant stream. It comes and goes in spurts. When the spurts are long enough I get low readings. If the spurt lasts long enough I have seen the TDS at 1. The TDS is lowering though. No more readings of 30.

 

[That Crusso Kid]

He said he wanted his thread livened up some. I figured you like having fun.

I’m generally faster with replies but I’m in my iPad and the keyboard broke so I’m replying to everything using the touch pad.

 

[tbrown]

I’m generally faster with replies but I’m in my iPad and the keyboard broke so I’m replying to everything using the touch pad.

I use my cell phone so I understand.

 

[That Crusso Kid]

I use my cell phone so I understand.

Oof! Maybe you’ll have an iPad or even a computer after that reincarnation!

 

[fishguy242]

That is after DI. I’ve only made 2.5 gallons so far. The TDS is down to about 6. It may be a water pressure thing though because the the product water isn’t a constant stream. It comes and goes in spurts. When the spurts are long enough I get low readings. If the spurt lasts long enough I have seen the TDS at 1. The TDS is lowering though. No more readings of 30.

air in system ,do you have a shut off valve on waste water line ? can you see air in any cans ?
what is your pressure

 

[Lost in the Sauce]

I replaced all prefikters and DI stage before sending it over. Even with a fouled membrane, It will still get down to zero in a bit. I usually throw out the first 10 gallons I make after a full reset.

 

[That Crusso Kid]

air in system ,do you have a shut off valve on waste water line ? can you see air in any cans ?
what is your pressure

What exactly is this? Reef talk? Geez!

@Fishy888 - I presume you’re not running a booster pump. Is this correct?

 

[tbrown]

What exactly is this? Reef talk? Geez!

@Fishy888 - I presume you’re not running a booster pump. Is this correct?

Not reef talk per se... More like RO talk.

 

[Fishy888]

I replaced all prefikters and DI stage before sending it over. Even with a fouled membrane, It will still get down to zero in a bit. I usually throw out the first 10 gallons I make after a full reset.

It’s starting to get down to 3 more consistently. I’ve only made 2.5 gallons so far so I’ll see how it does after 10 gallons worth.

 

[Fishy888]

What exactly is this? Reef talk? Geez!

@Fishy888 - I presume you’re not running a booster pump. Is this correct?

Nope, no booster pump lol. I’m not sure what out pressure out here is.

 

[Lost in the Sauce]

It’s starting to get down to 3 more consistently. I’ve only made 2.5 gallons so far so I’ll see how it does after 10 gallons worth.

The di resin is PACKED in there and would probably zero out your source water for a bit if it had to. The carbon blocks do release tiny particles for a bit.

 

[Fishy888]

air in system ,do you have a shut off valve on waste water line ? can you see air in any cans ?
what is your pressure

No valve on waste water line. I’ll look to see if air is in the system but @Lost in the Sauce packed the DI resin quite well. I don’t know my pressure unfortunately.

 

[fishguy242]

do you have a shut off valve on waste line ?
need to burp air out of unit