Ph buffer

  • Thread starter Thread starter Juniorh2r
  • Start date Start date
  • Tagged users Tagged users None

Juniorh2r

Valuable Member
View Badges
Joined
Nov 11, 2018
Messages
1,149
Reaction score
893
What state or country do you live in
Other International
Rating - 0%
0   0   0
What is the best way or recommended way to add ph buffer into my aquarium?? Can anyone please help? My ph is currently 7.89 it dropped a little I've added a few corals about 2 days ago.
 
You don't want to chase pH, you're really just looking for stability. Ideally you want to stay above 8, but if you're running the heat in your house you will see your pH drop.

pH will rise and fall throughout the day. You need to make sure you are measuring at the same time each day if you are doing a manual test. One option for raising pH and supplementing alk and calc in your tank is kalkwasser. That's only an option if you need to already supplement for alk and calc though.
 
Hey Junior2r,

Definitely don't add buffer to raise your pH. It affects more important parameters such as Alkalinity (as pH buffers raise the alkalinity).

Best to manage and maintain Alkalinity at a stable level. Unless your pH is super low (like below 7.7) I wouldn't do anything..
 
Ok thanks... I was under the impression corals need 8.0 to 8.4
 
No heater on Miami weather lol

Screenshot_20181126-112402_Apex Fusion.jpg
 
It all looks good to me and as the guys have said, don’t start messing with pH to much and don’t chase numbers, your fine at your levels.

I nearly did this a while ago and after hours of research came to the conclusion, it’s only a very small % difference to 8 or 8.2 anyway, test margin for error, and more importantly everything in the tank was thriving and alive!

And welcome to R2R as well!
 
In case none one mentioned, use a kh (carbonate hardness) test and see if it is low. should be 8-10 degrees or so. then use baking soda to increase it if it is low.

Also measure pH just before lights out. What is important is the pH then is high indicating the co2 buildup during the night has been consumed with the light on.

Finally, you may want to check out the dr randy holmes-farley's imporved diy two part system in the reef chemistry section. It uses inexpensive materials to maintain calcium, magnesium, and carbonate. Once those are all in line it just seems the pH falls in line also.

my .02
 
Its fluctuating

Screenshot_20181126-213613_Apex Fusion.jpg
 
If you look at the trend over a few days it should look kinda like this.

20FAD5AD-2A78-48EF-8322-A216C081487D.png
 
Its fluctuating

Screenshot_20181126-213613_Apex Fusion.jpg
again what is the KH?

What is the file frame with that data? 24 hours, days, weeks?

FWIW my gut feel is KH is a little low. the PH swing will be less with higher KH. Which can be increased with small doses of baking soda.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.1%
  • Fish or coral food

    Votes: 5 5.3%
  • Test kits or reagents

    Votes: 10 10.6%
  • Filter media or replacement fleece

    Votes: 5 5.3%
  • RO/DI filters or supplies

    Votes: 15 16.0%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.7%
  • I keep a backup of everything

    Votes: 24 25.5%
  • Other (Post in the comments)

    Votes: 7 7.4%
Back
Top
Home
Post thread…
Market
What's new