- Joined
- May 6, 2018
- Messages
- 456
- Reaction score
- 224
Hey everyone I have a 40-50 gallon cube it's pushing 9 months old plus a month and a half cycle. I have a fairly large 9 head reverse hammer an 8 head just normal we I guess a 7 head Duncan, 50 cent sized acan and a 9 head torch. Got them all this size about 2 months ago. No growth at all. Hammers and torch look great. Duncan has never really had great extension but over the past few days the Duncan has been closed up tight. I got a phosphate checker. Checked it and read .23. checked the instruction and retested. Again I get .23 is this my cause?
Alk= 9.0 dkh red sea
Cal= 410 res sea
Mag=1380 red sea
Temp held at 77 via ink bird
And salinity is 1.025
I currently don't have a major algae problem just kinda the normal "new" stage stuff some film algae and just very light covering of brown which is vaccumed out 2 times a month during a 20% water change.
Curently only run mechanical and carbon. I do have phosepure on hand. But what else could be causing my Duncan to suddly close.
Alk= 9.0 dkh red sea
Cal= 410 res sea
Mag=1380 red sea
Temp held at 77 via ink bird
And salinity is 1.025
I currently don't have a major algae problem just kinda the normal "new" stage stuff some film algae and just very light covering of brown which is vaccumed out 2 times a month during a 20% water change.
Curently only run mechanical and carbon. I do have phosepure on hand. But what else could be causing my Duncan to suddly close.