Plumbing Pipe

  • Thread starter Thread starter kbsharp
  • Start date Start date
  • Tagged users Tagged users None
In that case, only being a drain, I think it COULD work.

But, me personally, I would rather rely on a glued/fused joint than o-rings that could pinch, dry rot, etc.
 
I am a union plumber and those push fittings are not good at all like the first person stay with regular sch 40 and glue
 
It is (polypropylene)
A very strong durable plastic with a high melting point making it ideal for hot-fill liquids. Plastic cups, baby bottles, kitchenware, microwave plastic containers are some of the common uses.
 
In that case, only being a drain, I think it COULD work.

But, me personally, I would rather rely on a glued/fused joint than o-rings that could pinch, dry rot, etc.
its just i'm really struggling to find PVC pipes that fit my bulkhead and iv'e been ripped off by a plumbing store like you can't imagine i asked for PVC pipes some primer and glue and some fittings (which i bought) he said thats 150pounds (196USD) I said what ???? and i had to remove some items to lower the cost after being there an hour, Eventually i got 6 elbow joints 1 gateway valve and a tee pipe all PVC they charged me 69 pound !!! (90 USD) but now i cant find pipe anywhere that will fit, I'm going to go return the stuff tomorrow and hopefully get a full refund
 
I am a union plumber and those push fittings are not good at all like the first person stay with regular sch 40 and glue
Oversd can I glue these joints after attaching, as they only have these push to fit pipes
 
Do you have a big box hardware store? If so I would take my bulk head there and see what fits.
 
its just i'm really struggling to find PVC pipes that fit my bulkhead and iv'e been ripped off by a plumbing store like you can't imagine i asked for PVC pipes some primer and glue and some fittings (which i bought) he said thats 150pounds (196USD) I said what ???? and i had to remove some items to lower the cost after being there an hour, Eventually i got 6 elbow joints 1 gateway valve and a tee pipe all PVC they charged me 69 pound !!! (90 USD) but now i cant find pipe anywhere that will fit, I'm going to go return the stuff tomorrow and hopefully get a full refund
8(which i didnt buy).. i bought the 6 elbow joints 1 gateway valve and a tee pipe
 
Do you have a big box hardware store? If so I would take my bulk head there and see what fits.
thats exacty what i did, and they couldnt fin a size to fit closest was a 32mm but if heated might fit they said
 
Do you have a big box hardware store? If so I would take my bulk head there and see what fits.
i went to 5 places and one was huge i am almost giving up
 
What tank did you buy and where did the bulk head come from?
 
Its an oldish tank Evolution Aqua 450s its the original bulk head, even stranger thing is that the one of the 32mm elbow fittings could squeezei n if heated however tried another 32mm elbow and it was way too big even if you heated it so im lost thats why i want to use the one in the link i pasted as i know its the one that fits
 
If you can keep the run straight with no 90 degree bends you should be ok as long as you keep the pipe supported so it does not come apart. Not ideal but might work.
 
If you can keep the run straight with no 90 degree bends you should be ok as long as you keep the pipe supported so it does not come apart. Not ideal but might work.
lets see i sort of got no option here, didn't know it would be such a mission tho
 
I would just replace the old bulkheads with new known size ones. And yeah plumbing parts are cheap unless younare buying sch80 and high quality Speers valves then it can get pricy fast.
 
I would just replace the old bulkheads with new known size ones. And yeah plumbing parts are cheap unless younare buying sch80 and high quality Speers valves then it can get pricy fast.

If I find one that can be an option yes
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 15 35.7%
  • I’d trust someone who knows my tank to choose

    Votes: 1 2.4%
  • I’d rather get a gift card and pick it myself

    Votes: 14 33.3%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 12 28.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new