Plumbing Question

[Ben Pedersen]

I just purchased a "Lifegard Aquatics 1-Inch Bulkhead Fitting Kit". The threading on the outside of the bulkhead looks to be around 1.75". I do not want to use the slip fitting that came with the kit. I want to purchase a 90 degree elbow that will fit directly on the end of the bulk head but can not find one with a 1.75" interior threading. Does anyone know where I can get one? I would prefer black but am desperate so any color would work.

I am also looking for a threaded reducer for the other side of the elbow to connect a 1" flexible tube.

Any help would be apriciated!

 

[NowGlazeIT]

Home Depot or Lowe’s should have them, take your bulkhead in there if your not sure about the size.

 

[NowGlazeIT]

You can use a street 90 and the a threaded coupling

 

[Ben Pedersen]

Home Depot or Lowe’s should have them, take your bulkhead in there if your not sure about the size.

Thank you for the response. I considered that but was hoping to be able to purchase online.

 

[Ben Pedersen]

You can use a street 90 and the a threaded coupling

Link?

 

[NowGlazeIT]

Here is the street 90 https://pvcpipesupplies.com/1-sched...erm=4581939838890286&utm_content=all products

 

[NowGlazeIT]

Here is the coupling adapter to attach to your elbow giving it threads https://pvcpipesupplies.com/pvc-fit...-80-pvc-female-adapters?connection_size1=1567

your going to need some 1 inch pvc pipe to glue the two fittings together

 

[Ben Pedersen]

Here is the coupling adapter to attach to your elbow giving it threads https://pvcpipesupplies.com/pvc-fit...-80-pvc-female-adapters?connection_size1=1567

your going to need some 1 inch pvc pipe to glue the two fittings together

Thanks.. I am looking with one that is already threaded.

 

[NowGlazeIT]

Thanks.. I am looking with one that is already threaded.

I’ve never seen a street 90 that was male-slip x female-threaded. You can get a normal 90 that is socket x threaded. But again you would need some 1 inch pipe to glue that 90 to your bulkhead.

 

[NowGlazeIT]

Wohoo I found one

1" Schedule 40 PVC 90 Street Elbow Spigot x FPT, 411-010

411-010 1" schedule 40 street 90 elbow, socket x FPT

pvcpipesupplies.com

 

[Ben Pedersen]

Wohoo I found one

1" Schedule 40 PVC 90 Street Elbow Spigot x FPT, 411-010

411-010 1" schedule 40 street 90 elbow, socket x FPT

pvcpipesupplies.com

Nice.. it doesn't look threaded on the other side. I am really trying to stay away from gluing. That is why I am looking for threaded.

 

[NowGlazeIT]

Nice.. it doesn't look threaded on the other side. I am really trying to stay away from gluing. That is why I am looking for threaded.

The bulkhead you pictured doesn’t have threads that’s why I posted the slip 90.
If you change the bulkhead to threaded you can use one of these

Nice.. it doesn't look threaded on the other side. I am really trying to stay away from gluing. That is why I am looking for threaded.

 

[adittam]

Are you trying to use the threads on the OUTSIDE of the bulkhead? The external threads are only for the bulkhead nut, not for connecting plumbing.

Installing Bulkhead Tips

Bulkhead tips: 1. Always install bulkheads clean and dry, no silicone, teflon or thread lubricants. Silicone and lubricants cause the gasket to scoot out or not seal properly. Have you ever removed an old automobile windshield or other gasketed glass? The rubber vulcanizes to the glass with...

www.reef2reef.com

 

[Water Dog]

+1 ^^^

Glad somebody picked it up. The threads on the outside of the bulkhead are ONLY for the bulkhead retaining nut. They are not tapered like the threading on PVC fittings and do not provide any sealing.

 

[Water Dog]

*Edit - Double Post

 

[Ben Pedersen]

Are you trying to use the threads on the OUTSIDE of the bulkhead? The external threads are only for the bulkhead nut, not for connecting plumbing.

Installing Bulkhead Tips

Bulkhead tips: 1. Always install bulkheads clean and dry, no silicone, teflon or thread lubricants. Silicone and lubricants cause the gasket to scoot out or not seal properly. Have you ever removed an old automobile windshield or other gasketed glass? The rubber vulcanizes to the glass with...

www.reef2reef.com

Thanks for the clarification. I wish they made a product that could use the bulk head threads to attach an elbow.

I guess I will have to glue.

 

[Water Dog]

Thanks for the clarification. I wish they made a product that could use the bulk head threads to attach an elbow.

I guess I will have to glue.

They do, You just have to buy the right bulkheads…

Bulkhead ABS Slip x Thread (Slip on the Flange/Head side)

Bulkheads are used to attach plumbing to aquariums and sumps to allow water to flow through them. These low profile reef safe bulkheads are made from black ABS plastic. Our supplier manufactures these slightly thicker than competitor aquarium bulkheads making them more reliable. Bulkheads come...

www.bulkreefsupply.com

 

[Ben Pedersen]

They do, You just have to buy the right bulkheads…

Bulkhead ABS Slip x Thread (Slip on the Flange/Head side)

Bulkheads are used to attach plumbing to aquariums and sumps to allow water to flow through them. These low profile reef safe bulkheads are made from black ABS plastic. Our supplier manufactures these slightly thicker than competitor aquarium bulkheads making them more reliable. Bulkheads come...

www.bulkreefsupply.com

So that bulkhead threading can be used to directly attach an elbow? What elbow? I want to use the external threading so no internal diameter is lost.

 

[Water Dog]

No. That threaded bulkhead has internal threading. The external threading on a bulkhead is ONLY for the retaining nut. If you want to increase diameter, buy a bigger bulkhead, or a bigger overflow/drill a bigger hole that will accommodate a bigger bulkhead.

 

[Ashish Patel]

As Waterdog said outside is for retainer nut. Also outside is 1.75" I doubt you'll find a thread fitting at homedepot since most of the size goes up by 1/2" (but i could be wrong). get a new bulkhead or make the 1" inside work to your needs