Poor Man's Nutrients Control - Donovan's Nitrate Destroyer

Ashish - I'd build it at a size your environment allows. Once it gets going, you can crank the nitrate reduction up/down simply by increasing/decreasing your flow & primarily your carbon source. My DND is 54" in total length (4" PVC) for a 120g DT with a 55g sump and to maintain NO3 between 5-10, it has only required 6-9ml of vodka daily.

Thanks. I have 6" pvc and 4" pvc and space to build it however large I want. However I don't want to overdue it so I was thinking 4" pipe about 30-36" tall. I want to put a union between the chambers so i can easily remove and clean it without having to dump both out at the same time. Not sure if that's really necessary
 
Thanks. I have 6" pvc and 4" pvc and space to build it however large I want. However I don't want to overdue it so I was thinking 4" pipe about 30-36" tall. I want to put a union between the chambers so i can easily remove and clean it without having to dump both out at the same time. Not sure if that's really necessary
My tanks/sump (250 gals) is just about half of yours and my DND is built with 4” pvc and is 42” tall to give you a frame of reference.
 
This is the style I like. Someone from this thread build this so would like to know if they are still around.
20261114_161857.jpg
20261114_161857.jpg
 
Mine is similar.

IMG_0927.jpeg

Looks great.
How much media is needed to fill up this beast? Things are so inflated in price right now so not sure the best place to purchase things. I was thinking chewy.com.

Also I have these 1/4" ro bulkhead I can use for the inlet for the tank water aswell as the drain. Someone posted a Pic of how the media looked after few year and some of that junk could clog the exit. Would it be better to keep the drain 3/4" so it never get clogged with junk? I can see that happen overtime effecting the drip rate but it would be easier to the flow overtime.
 
Last edited:
I will add the DND in my sump. I already dose vodka and have a manifold on my return with a 1/4" quick connect. I like that this project doesnt involve me having to add any new equipment. I got the idea about this when I saw David saxby and Vivid Aquariums using the deltec nitrate reactor (i wonder what kind of media they use. This DIY version seems alot better. But is the 2 chambers really necessary? The thread is way to look to read every page so anyone please enlighten me.


20261117_085611.jpg
20261117_085620.jpg
20261117_085829.jpg
20261117_085841.jpg
I
 
Broadcast feeding 26ml of vodka results in these filter socks getting clogged in 2 days. Before vodka they would last 5-7 days i am hoping this resolves this issue
20261117_090559.jpg
 
Looks great.
How much media is needed to fill up this beast? Things are so inflated in price right now so not sure the best place to purchase things. I was thinking chewy.com.

Also I have these 1/4" ro bulkhead I can use for the inlet for the tank water aswell as the drain. Someone posted a Pic of how the media looked after few year and some of that junk could clog the exit. Would it be better to keep the drain 3/4" so it never get clogged with junk? I can see that happen overtime effecting the drip rate but it would be easier to the flow overtime.
I used this from Amazon. Nice size and reasonable cost. I used the 5.5lb and a bit of live rock I had lying around. You’ll need more.
https://a.co/d/0aDDN9TB
I used 1/4” for the carbon port but used 1/2” for input and output to reduce clogging. You will still get some, especially early on but it reduces as it matures.
 
I used this from Amazon. Nice size and reasonable cost. I used the 5.5lb and a bit of live rock I had lying around. You’ll need more.
https://a.co/d/0aDDN9TB
I used 1/4” for the carbon port but used 1/2” for input and output to reduce clogging. You will still get some, especially early on but it reduces as it matures.

Thanks for the link. I noticed you sealed the caps. How long has it been in operations and do you plan on cleaning it? Since mine is in the sump I was assuming to leave it dry fitted
 
Thanks for the link. I noticed you sealed the caps. How long has it been in operations and do you plan on cleaning it? Since mine is in the sump I was assuming to leave it dry fitted
Actually it’s not sealed. You can’t see in the photo but I used a plumbing cleanout which screws into the tops of the caps. It’s been running for about a year and half and no cleaning. When it got clogged, I was able to clear it by shoving a a RODI tube up the 1/2” tubing. Only the output tube gets clogged, not the input.
 
Loos good. Like mine , just grey. 😁What size tank?
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 23.2%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.9%
  • I’d rather get a gift card and pick it myself

    Votes: 45 40.2%
  • I’d prefer gear or supplies instead

    Votes: 3 2.7%
  • Please don’t surprise me with livestock

    Votes: 28 25.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new