Power out on energie EB6 Email Alarm

[Bassie]

Hi all,

Can anybody advice me on the code for an Email alarm from my Apex if the energie EB6 bar is out of power. I’ll know you can heve an alarm on ervery socked but wat i need is wenn de bar is compleedly out of power. Apex controller still runs.

TIA
Henk

 

[SuncrestReef]

Add this line to your EmailAlm program:

If Power EB6 Off 000 Then ON
(where "EB6" is the name of your EB6 module)

For more details, see my Apex Command Reference article, and my tutorial on Apex Power Monitoring. Here's a snippet:

If Power [Power Probe] [ON/OFF] [###] Then [ON/OFF/Profile_Name/%]

This command is used to set an output state based on the detection of a power failure. The [Power Probe] is either the Apex or the name of an attached Energy bar.

For more details on If Power and instructions on how to integrate the Apex with a UPS backup battery, see my tutorial on Apex Power Monitoring: https://www.reef2reef.com/ams/neptune-apex-programming-tutorials-part-4-power-monitoring.698/

 

[Bassie]

Thx that did work