Power Supply Replacement

[Jdubyo]

Good morning!

I need to replace the power supply for my Tunze Osmolator. As I am looking around I am having trouble finding an 11 volt power supply. It seems like there are tons of 9s and 12s but no 11... now I know nothing about volts and amps and mA etc... but would a 12v power supply be asking for a fire? Is anyone able to point me in the direction of an acceptable replacement?

 

[Jdubyo]

Bump

 

[Jdubyo]

Bump?

 

[xxkenny90xx]

All I'm seeing is the one for the tunze nano osmolator. Have you checked with tunze? I'm sure they'll charge quite a bit but do what you have to do!

 

[vetteguy53081]

Found an Ai replacement on Amazon easily when I needed one. Also check Ebay

 

[Jdubyo]

All I'm seeing is the one for the tunze nano osmolator. Have you checked with tunze? I'm sure they'll charge quite a bit but do what you have to do!

I haven’t checked with Tunze yet for this reason. I will if I need to. I checked the website but it doesn’t appear they have these available as replacement parts. It seems like all of the newer models have been updated to a 12v power supply so that is what they have.

Found an Ai replacement on Amazon easily when I needed one. Also check Ebay

Do you mind me asking how you knew you had the right one? I am not sure if it needs to be exactly what it says or if I could do slightly under powered?

The output says 7-11 volts so if I went with a 9v power supply would that suffice? Or is that saying the range in which the 11v DC power supply would run is between 7 and 11 volts.

Hopefully I am not coming off as too much of a dummy here... I barely know what I am saying ;Dead

 

[vetteguy53081]

I haven’t checked with Tunze yet for this reason. I will if I need to. I checked the website but it doesn’t appear they have these available as replacement parts. It seems like all of the newer models have been updated to a 12v power supply so that is what they have.



Do you mind me asking how you knew you had the right one? I am not sure if it needs to be exactly what it says or if I could do slightly under powered?

The output says 7-11 volts so if I went with a 9v power supply would that suffice? Or is that saying the range in which the 11v DC power supply would run is between 7 and 11 volts.

Hopefully I am not coming off as too much of a dummy here... I barely know what I am saying ;Dead

I matched it with an adapter they had.

https://www.aliexpress.com/popular/11v-dc-power-supply.html
https://www.amazon.com/ac-dc-power-supply/s?k=ac+to+dc+power+supply
https://www.bigalspets.com/aquarium...erm=4578503892955739&utm_content=All Products
https://www.dealpilot.com/serp?q=aq...pply&msclkid=261353d26fd11beba02b0c786e6d446c[/URL]

 

[Jdubyo]

I matched it with an adapter they had.

https://www.aliexpress.com/popular/11v-dc-power-supply.html
https://www.amazon.com/ac-dc-power-supply/s?k=ac+to+dc+power+supply
https://www.bigalspets.com/aquarium...erm=4578503892955739&utm_content=All Products
https://www.dealpilot.com/serp?q=aq...pply&msclkid=261353d26fd11beba02b0c786e6d446c

I do appreciate this but none of these are what I need. The old power supply was just a plug.... no big electronic box with knobs and adjustable settings. The other ones listed were 12v rather than 11.

I do not know if 1 volt will make a big difference but I know I don’t want to buy a whole new unit or burn my house down ;Nailbiting

 

[Jdubyo]

I feel like I must be missing something. I have searched for hours at this point and it does not seem like 11V is a common adapter type... I’m so confused

 

[Jdubyo]

Matter solved. I am just going to leave this here in case anyone else may need it :)

thumbs up to Tunze for the prompt and helpful customer service

Replacement Link Provided