cilyjr
Valuable Member
- Joined
- Sep 28, 2011
- Messages
- 2,006
- Reaction score
- 2,200
- Location
- Arroyo Grande
- What state or country do you live in
- California
I have 4 mp40s on the rear wall of a 320g stick dominate tank. 68x36x30 inches
2 of these pumps have been with me for 10 years and still going strong.
Nothing over the top is important to me. I don't even like viewing obstructions on the side panels.
I designed and 3d printed new covers with a redirector recently so sand blowing is not an issue. Also I have a larger grain sans then many. Think tropic Eden meso flake.
I had a few issues years ago with the wet side assembly and they immediately replaced them no questions, other than serial number, asked!
For many years I always used cheapo powerheads , I am absolutely glad I switched and will probably not use another product.
2 of these pumps have been with me for 10 years and still going strong.
Nothing over the top is important to me. I don't even like viewing obstructions on the side panels.
I designed and 3d printed new covers with a redirector recently so sand blowing is not an issue. Also I have a larger grain sans then many. Think tropic Eden meso flake.
I had a few issues years ago with the wet side assembly and they immediately replaced them no questions, other than serial number, asked!
For many years I always used cheapo powerheads , I am absolutely glad I switched and will probably not use another product.
