Profilux on Mac

[this is me]

It's been awhile that I've looked at a Profilux. My P3EX just keep on kicking.
Just want to know if the P4 will now work with a mac? I'm grown distant with Windows over the years.

 

[AZMSGT]

No, no mac support. As others will tell you set up a dual boot to a windows screen. Or just buy a super cheap used windows 10 laptop.

 

[lmm1967]

if you don't mind spending up to $100 - parallels works great.

GHL app is the only reason I have / run it - it works just fine and I haven't had an challenges relate to MAC -> parallels -> GHL hardware

 

[Vinny@GHLUSA]

There will be no mac version. Our focus is going towards developing the app and cloud platform as over 90% of the features in GCC are now doable on those platforms.

As others mentioned earlier, if you need to do an update or use GCC, a windows computer can be had for about $100.

 

[esther]

It's been awhile that I've looked at a Profilux. My P3EX just keep on kicking.
Just want to know if the P4 will now work with a mac? I'm grown distant with Windows over the years.

I use Bootcamp on my Mac. It's free and it works great!

 

[this is me]

There will be no mac version. Our focus is going towards developing the app and cloud platform as over 90% of the features in GCC are now doable on those platforms.

As others mentioned earlier, if you need to do an update or use GCC, a windows computer can be had for about $100.

Are you saying the P4 can be set up via the app? Or that's in the future work?

 

[Vinny@GHLUSA]

Are you saying the P4 can be set up via the app? Or that's in the future work?

You can set it up right out of the box using the app.

 

[this is me]

Thanks. Even firmware update? Really tired of firmware update on the P3 via USB. Sometimes it stopped in the middle and I had to pull out a 2003 laptop with serial connector to use the flash tool.

 

[AZMSGT]

Thanks. Even firmware update? Really tired of firmware update on the P3 via USB. Sometimes it stopped in the middle and I had to pull out a 2003 laptop with serial connector to use the flash tool.

No firmware still needs to get installed via windows.

 

[CEReefer]

@Vinny@GHLUSA any update on when the firmware updates will be administered over the air?