Not sure if this is the right forum/way to ask these questions, but here they are -
I'm considering getting a Profilux P4 controller and after looking at the web site and the manual there are several things I can't quite figure out:
I'm considering getting a Profilux P4 controller and after looking at the web site and the manual there are several things I can't quite figure out:
- I have a Waveline DC10000 II pump that is 'Apex Ready.' Can this be controlled with the Profilux controller?
- What is the DCS Receiver port for?
- What is the power failure monitor port for? I assume It monitors the voltage input, but if the power goes out to the voltage input to the port, wouldn't it also be out for the whole controller?
- I assume the PAB port is for the 5.1 powerbar. Are the switch/powerbar ports for the STDL4-4 and powerbar 6d powerbars?
- What is the Aux port used for?
- Does the P4 have the option for a wired ethernet connection, or just WiFi?
- If I want to have a leak detector, do I need the separate leakage interface or can it hook directly to the controller?
- The PLM-ADIN expansion card lists 4 digital inputs. What's the difference between these and the level inputs on the controller (or the PLM-4Level)?