PROGRAMMING SKIMMER WITH APEX

jose hernandez

Valuable Member
View Badges
Joined
Aug 21, 2015
Messages
2,385
Reaction score
352
Rating - 0%
0   0   0
looking to program my skimmer using my apex to run for only 12 hours a day its way to big for my tank its taking all my nutrients out
 
forgot to mention i have it programmed with my return pump to turn off when the return is off and then delay for 15 minutes to turn back on afterwards
 
forgot to mention i have it programmed with my return pump to turn off when the return is off and then delay for 15 minutes to turn back on afterwards

Just merge your current code with the code I posted, but be sure to place any commands that turn it ON above any commands that turn it OFF.

also when is the best time to turn it on and off

That question is beyond the scope of the "Aquarium Controllers" forum. I assume it is going to depend on other factors such as when you feed your fish/corals, what your lighting and refugium lighting schedule is, and what other nutrient export techniques you're using. You might want to post that question in the "Reef Aquarium" or "Reef Chemistry" forums.
 
If you must turn it off, I would run it during the night when CO2 increases to offset the drop in pH and shut it off during the day. Long term, I would consider buying an appropriately sized skimmer.
 
i have no refugium all i run is a marine pure block carbon chemipure elite my skimmer which is rated for 400 gallons and a 57 watt uv as far as feeding i was feeding 3x a day cut it down 2x a day feeding is done afternoon around 2 then again around 6 in the evening
 
What size tank? Dry rock? Ocean rock? Alternatively, you can slowly remove the blocks and stop using chemical filtration and just let the skimmer do all the heavy lifting. I wouldn't reduce feeding necessarily, but increase a little. The key is heavy in and heavy out, import/export.
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 11 57.9%
  • Automated dosing

    Votes: 0 0.0%
  • Mechanical filtration / roller filter

    Votes: 1 5.3%
  • Automated water testing

    Votes: 0 0.0%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 4 21.1%
  • Controller and remote monitoring

    Votes: 2 10.5%
  • Leak detection and emergency shutoff

    Votes: 1 5.3%
  • Automatic water changes

    Votes: 0 0.0%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new