Pump Failing?

  • Thread starter Thread starter RMS18
  • Start date Start date
  • Tagged users Tagged users None

RMS18

I keep water chemistry as my hobby
View Badges
Joined
Aug 21, 2015
Messages
2,996
Reaction score
2,156
Location
The Shore
Rating - 0%
0   0   0
I have sicce slient 5.0 that is about 3 years old. Recently over the past week it has not been holding a constant gph. It fluctuates from 585gph to 567gph. Because of this my bean overflow isn't consistent and will gurgle then over flow a bit and back and fourth. I took the pump out the other day thinking it needs a cleaning but it was fine.

Thinks it's starting to go? I'm not expecting a solid gph but I've never had issues with it changing so much my overflow becomes un-tuned.
 
Do an overnight vinegar bath
 
NO do not do that. Vinegar has been shown to deteriorate the epoxy that maker the pumps submersible.
Citric acid powder is now the choice to clean pumps.
Vinegar can be used but for no more than 10 minutes.
 
Have been using vinegar on my pumps about once a year with no issues. One of my ehiems is over 30 years old

but if citrus acid works I shall give it a try
 
Hard to see why cleaning would solve fluctuating pumping levels, particularly if the insides are observably clear. Are you seeing any recent voltage fluctuations? That seems to affect the gph of my main pump. It fluctuates 10-15 gph over the course of the day.

I would expect to get much longer than 3 years out of a sicce pump.
 
Hard to see why cleaning would solve fluctuating pumping levels, particularly if the insides are observably clear. Are you seeing any recent voltage fluctuations? That seems to affect the gph of my main pump. It fluctuates 10-15 gph over the course of the day.

I would expect to get much longer than 3 years out of a sicce pump.
True. Although cleaning is a good thing to do , wouldn’t hurt and at least then you could rule that out.
Agreed, should get more than 3 years
 
Hard to see why cleaning would solve fluctuating pumping levels, particularly if the insides are observably clear. Are you seeing any recent voltage fluctuations? That seems to affect the gph of my main pump. It fluctuates 10-15 gph over the course of the day.

I would expect to get much longer than 3 years out of a sicce pump.



Voltage looks even... Take a look.

Screenshot_20200214-220635_Apex Fusion.jpg
 
Last edited:
I took out the propeller there is no calcium build up... There was the smallest amount of slime on a few of the props. I did clean it all under water and a cleaning brush. I even cleaned my Neptune gph meter, that was also very clean. - guess this is props to my good husbandry :)
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new