Pump replacement part

[RichardinTN]

Anyone know where I can get a replacement cover for a Pan World NH-30PX?? It runs my mixing station and I accidentally snapped it off. I’ve been looking and I can’t seem to find one that actually matches. Even the one I found online that’s supposed to be a match does not look like it is the same. I really don’t want to have to buy an entirely new pump.

 

[rainmaker]

Don’t know if you have tryed reefh2o .com
but they have a number listed you can call for parts

 

[H@rry]

Have you tried to glue it back together? Nothing to lose by trying.

 

[rcmike]

This place has a 30PX-T. I'm not sure of it is the same or not but you might try contacting them. If it's not maybe they can get you one.

https://www.customaquatic.com/estore/control/product/~product=WP-PWU-1011212300;jsessionid=3EAF8962BA929B53BD58E4D5AA5C4B7A.jvm1

Have you tried to glue it back together? Nothing to lose by trying.

Besides a lot of water on the floor if it fails a few months down the road. Lol

 

[Eagle_Steve]

I had that happen once and was able to fix it.
Cut the outlet to where it is straight, drill and tap the outlet to a pipe thread that fits, use pipe dope and a threaded fitting into the newly tapped threads and tighten gently. You lose a little flow, but it is functional and safe.
You can do a hose barb, pvc thread to slip, whatever you want as long as it matches the threads you tapped.

 

[RichardinTN]

I have the 30PX-T cover and it doesn’t fit. And the inside diameter is already so narrow that trying to put another pipe inside isn’t really an option. I’m probably just going to get a new one and hold onto this body as a backup. Thanks for all the help.