QC for test kits?

  • Thread starter Thread starter SallyWho
  • Start date Start date
  • Tagged users Tagged users None

SallyWho

Well-Known Member
View Badges
Joined
Jul 20, 2017
Messages
880
Reaction score
672
Location
SW Missouri
What state or country do you live in
Missouri
Rating - 0%
0   0   0
Does anyone know if there are commercially available quality controls for test kits? I know the Hanna checkers have calibrators, but I don't think I've heard of any manufacturer having QC. I work in a hospital laboratory, and not being able to do QC to absolutely ensure that the test kits are working correctly drives me bananas! :p I can probably use RODI as a negative control for several of the analytes, but that's assuming the RODI water doesn't have any nitrates, nitrites, phos, ammonia, etc. Positive controls though? Not a clue!
 
Depending on the test manufacturer, I would directly contact them and ask for calibration advice/samples. PH is used by buffers, refractometers use pure water, the bare bones answer is test something you know to be fact, then go off it.
 
I assume that by positive control you just mean a standard.

yes, there are commercial standard for many things.

What kit do you want to evaluate? Some are easier than others. Some are sold by hobby companies that you have to decide how much you trust them.
 
The trident comes with a standard with each set of reagents. They are using the best practice I've seen in tbe hobby which is surprising. They are even better in this regard than hanna. But the trident is crazy expensive.

Hanna sells a cal standard for the alk checker but it's pretty close to useless.

1) the hanna alk standard comes with 2 pre-mixed vials, for C.1 and C.2. So, this "calibration" does not assess lot-to-lot variation of hanna reagents, which I've found to be significant (+/- 0.3 dkh).

2) the hanna alk standard gives a single data point (for checker itself only) at 5.0 dKH. Why do I care about 5.0? I've found the hanna checker to be +/-0.1 dkh at 5.0 but more like +/-0.4 dkh at 8.0. You'd never know that just using a single data point at 5.0

I don't know if the other hanna cal standards are better, or if anyone else has standards.
 
The trident comes with a standard with each set of reagents. They are using the best practice I've seen in tbe hobby which is surprising. They are even better in this regard than hanna. But the trident is crazy expensive.

Hanna sells a cal standard for the alk checker but it's pretty close to useless.

1) the hanna alk standard comes with 2 pre-mixed vials, for C.1 and C.2. So, this "calibration" does not assess lot-to-lot variation of hanna reagents, which I've found to be significant (+/- 0.3 dkh).

2) the hanna alk standard gives a single data point (for checker itself only) at 5.0 dKH. Why do I care about 5.0? I've found the hanna checker to be +/-0.1 dkh at 5.0 but more like +/-0.4 dkh at 8.0. You'd never know that just using a single data point at 5.0

I don't know if the other hanna cal standards are better, or if anyone else has standards.

I agree that most Hanna standards are not standards at all, but machine testing materials to simply verify the electronics are working as expected.. They do not assess the actual function of the reagents or the method at all.
 
The manufacturer’s representation.

Thanks. Such representations are often self serving, if not completely incorrect. I'm not saying it is necessarily wrong here, but in general it may not be a good way to understand what to use and why and how.

That's part of the reason for this forum: to sort true chemical facts from manufacturer fantasy.
 
Here’s something I found a while back.

https://web.archive.org/web/2000121...om/fish2/aqfm/1999/mar/features/1/default.asp
430EFFF4-A920-4925-A497-17E3174761B9.png
 
Does anyone know if there are commercially available quality controls for test kits? I know the Hanna checkers have calibrators, but I don't think I've heard of any manufacturer having QC. I work in a hospital laboratory, and not being able to do QC to absolutely ensure that the test kits are working correctly drives me bananas! :p I can probably use RODI as a negative control for several of the analytes, but that's assuming the RODI water doesn't have any nitrates, nitrites, phos, ammonia, etc. Positive controls though? Not a clue!
If you want to ensure every test kit is working, there is no short cut. You have to run at least one reference sample, even better use 3 at different concentrations. Otherwise you are just trusting that the manufacturer is doing a good job. If you ask them about QC, they will of course tell you that “they are doing a good job”, which is a waste of time.

The good news is that you can buy a multi-parameter reference standard with nitrate, phosphate and other analytes in one bottle. I don’t recall the name though. @Rick Mathew uses it.
 
If you want to ensure every test kit is working, there is no short cut. You have to run at least one reference sample, even better use 3 at different concentrations. Otherwise you are just trusting that the manufacturer is doing a good job. If you ask them about QC, they will of course tell you that “they are doing a good job”, which is a waste of time.

The good news is that you can buy a multi-parameter reference standard with nitrate, phosphate and other analytes in one bottle. I don’t recall the name though. @Rick Mathew uses it.
Here is the referance standard Dan_P is referring to


Saltwater Multi Reference Solution - Fauna Marin Below are links to two sources​

https://www.bulkreefsupply.com/fauna-marin-multi-reference-solution.html​


https://bigshowfrags.com/multi-reference-solution-fauna-marin/
It should be noted that these are not certified standards but they do serve as a good reference check..
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.1%
  • Fish or coral food

    Votes: 5 5.3%
  • Test kits or reagents

    Votes: 10 10.6%
  • Filter media or replacement fleece

    Votes: 5 5.3%
  • RO/DI filters or supplies

    Votes: 15 16.0%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.7%
  • I keep a backup of everything

    Votes: 24 25.5%
  • Other (Post in the comments)

    Votes: 7 7.4%
Back
Top
Home
Post thread…
Market
What's new