QT Fish from Prior Tank??

orangestorm

New Member
View Badges
Joined
Feb 22, 2026
Messages
9
Reaction score
14
Location
US
What state or country do you live in
Washington
Rating - 0%
0   0   0
Hi there!

I’m upgrading my tank from a 15 gallon to a 60 gallon and have a question im hoping someone can answer.

Should I QT my clownfish and yellow clown goby before they enter into my new tank?

The yellow clown goby was “quarantined” by my LFS, and I got the clowns from ORA when they were babies.

I’ve had them for nine months and I haven’t had any issues with them. They seem completely healthy.

I know the possibility exists that they could be carrying Ich or velvet, but I want to know how many of you would QT your fish in this situation.

Please help!
 
Hi there!

I’m upgrading my tank from a 15 gallon to a 60 gallon and have a question im hoping someone can answer.

Should I QT my clownfish and yellow clown goby before they enter into my new tank?

The yellow clown goby was “quarantined” by my LFS, and I got the clowns from ORA when they were babies.

I’ve had them for nine months and I haven’t had any issues with them. They seem completely healthy.

I know the possibility exists that they could be carrying Ich or velvet, but I want to know how many of you would QT your fish in this situation.

Please help!
The traditional QT period is 40 days to know if there's going to be a breakout of something – you're WAY past that.

The main reason for QT is actually for recovery from shipping stress....sometimes this stress results in a breakdown of the fishes immunity and when that happens there can be an outbreak of something. It's important to watch for, as you know.

But....!

If there's that much stress in your upgade at home, something went seriously wrong.

You should not have to do anything other than **carefully* move your livestock to the new tank. If you can do it without removing them from the water (ie do not use a net to catch them; use a solid container) you can eliminate almost 100% of the stress on them. (It should still be VERY low stress compared to shipping and handling even if you have to use a net tho.)
 
When I was upgrading, I didn't QT my fish from the old tank. Acclimation, on the other hand, is a must. Standard procedure that works for me. I acclimate by adding water from the new tank to the bucket with the fish over a period of 45mins. Try to distribute the dosage evenly, every 15min or more often, to match the salinity of the new tank after 45mins, at which point I transfer.
 
Hm....acclimation should not ordinarily be necessary for this kind of move either, @orangestorm.

In case you weren't already going to, make sure to save as close to 100% of your old water as you can, and make up the rest of the new tank's volume with new saltwater. (Filter it through a fine-mesh filter sock if the old water is dirty....ideally something like 5 micron.)

Acclimation is mainly for coping with ammonia buildup during long shipping intervals (ie from overseas)...less so, but also for differences in salinity. But you will match the new water's salinity to the old water's. For bonus points, you can temperature match the new water, but if the water is at least room temperature that's not typically needed either. (Your heaters from the old tank will be available and already set to the correct temperature tho, for what it's worth.)

During an in-house move there should be no chance for ammonia to build up and no difference in salinity from source to destination...thus no need for acclimation.

There's a good "sticky thread" in the fish section (or maybe it's one of @Jay Hemdal's articles?) that runs through all this in good detail if you want more background.
 
Hm....acclimation should not ordinarily be necessary for this kind of move either, @orangestorm.

In case you weren't already going to, make sure to save as close to 100% of your old water as you can, and make up the rest of the new tank's volume with new saltwater. (Filter it through a fine-mesh filter sock if the old water is dirty....ideally something like 5 micron.)

Acclimation is mainly for coping with ammonia buildup during long shipping intervals (ie from overseas)...less so, but also for differences in salinity. But you will match the new water's salinity to the old water's. For bonus points, you can temperature match the new water, but if the water is at least room temperature that's not typically needed either. (Your heaters from the old tank will be available and already set to the correct temperature tho, for what it's worth.)

During an in-house move there should be no chance for ammonia to build up and no difference in salinity from source to destination...thus no need for acclimation.

There's a good "sticky thread" in the fish section (or maybe it's one of @Jay Hemdal's articles?) that runs through all this in good detail if you want more background.

Are you saying that even if the new tank is let's say 3months old there is no need for acclimation? Even if match temperature and salinity, other water parameters will most likely not be inline.
I did move some freshwater fish in the past without acclimation between tanks in my house with no issue, I admit.
I might be mistaken, but I thought it would be beneficial for the fish to introduce it slowly to the water in the new tank. Are you saying that in such a case (moving between tanks in own house) acclimation doesn't help at all. Or is it even worsening the situation by introducing stress due to temporary containment?
 

TOP 10 Trending Threads

HOW DO YOU COVER THE TOP OF YOUR REEF TANK?

  • Full mesh screen

    Votes: 14 51.9%
  • Glass or acrylic lid

    Votes: 4 14.8%
  • Partial screen or cover

    Votes: 0 0.0%
  • Canopy or fitted hood

    Votes: 3 11.1%
  • Open top

    Votes: 5 18.5%
  • A combination of these

    Votes: 1 3.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new