- Joined
- Oct 3, 2026
- Messages
- 6
- Reaction score
- 2
- What state or country do you live in
- California
Hi everyone!!
I really need some urgent help with my fish. I suspect ich or Brooklynella may have entered my 80-gallon reef tank through a tang and an Oreni tilefish that my fish guy quarantined before adding them. Both later died, but I don’t have a confirmed diagnosis.
My mandarin had been very unwell and barely moving, and one of my clowns has gotten worse with white, patchy-looking skin. Tonight, I set up a 15-gallon Innovative Marine AIO and moved my yellow watchman goby, sand goby, mandarin, two clowns, neon goby and redhead goby into it for treatment.
My mandarin initially looked worse after the transfer and released slime, but has since improved. His breathing, movement and skin all look better now, although I’m still concerned.
Only the front section is filled with saltwater, and the back chambers are empty. There’s a heater and an air stone in the front, but no filter running. I added Copper Power. The QT is currently reading 31 ppt and 25.5°C.
Is this setup okay temporarily for all these fish? Should the back chambers be filled and the return pump running? How do I check whether there’s enough water and whether the copper dose is correct? What treatment would be appropriate if this is brook rather than ich? I also need advice on managing ammonia and water changes without a cycled filter.
This has never happened to me before. I’ve looked after some of these fish for over two years, and I’m terrified of losing them. Any experienced advice on what I should do immediately would mean a lot. I can share photos and videos.
I really need some urgent help with my fish. I suspect ich or Brooklynella may have entered my 80-gallon reef tank through a tang and an Oreni tilefish that my fish guy quarantined before adding them. Both later died, but I don’t have a confirmed diagnosis.
My mandarin had been very unwell and barely moving, and one of my clowns has gotten worse with white, patchy-looking skin. Tonight, I set up a 15-gallon Innovative Marine AIO and moved my yellow watchman goby, sand goby, mandarin, two clowns, neon goby and redhead goby into it for treatment.
My mandarin initially looked worse after the transfer and released slime, but has since improved. His breathing, movement and skin all look better now, although I’m still concerned.
Only the front section is filled with saltwater, and the back chambers are empty. There’s a heater and an air stone in the front, but no filter running. I added Copper Power. The QT is currently reading 31 ppt and 25.5°C.
Is this setup okay temporarily for all these fish? Should the back chambers be filled and the return pump running? How do I check whether there’s enough water and whether the copper dose is correct? What treatment would be appropriate if this is brook rather than ich? I also need advice on managing ammonia and water changes without a cycled filter.
This has never happened to me before. I’ve looked after some of these fish for over two years, and I’m terrified of losing them. Any experienced advice on what I should do immediately would mean a lot. I can share photos and videos.












