Question on coral lighting with ONLY white-light sepctrum.

JadeKirin

New Member
View Badges
Joined
Jul 22, 2026
Messages
2
Reaction score
0
Rating - 0%
0   0   0
Hey guys,

I am running a reef tank with a RED SEA G3 60 tank using just one REA SEA ReefLED 90 light. How should I set up my light spectrum if I wish to use only white light and still be able to keep some basic SPS, LPS alive?

I have attached my current lighting setup in pictures. It start at 9:00 AM at 0% and peaks at 10:00 AM at 20% intensisity until 8:00 PM, then it goes back to 0 at 9:00 PM, and I have set only a little bit of blue light at 3% for an hour at night.

Is the current lighting schedule sustainable for coral? If anyone have a similiar experince on keeping coral alive with only white light please let me know.



b5b78eb6129437cfc9048c0450800f11.jpg
 
I agree that you are going to need to run those lights higher than 20% if you want to grow anything
 
Upvote 0
Windex look is what makes the corals pop, right?

Depends on the coral. It makes some pop and washes out others. Some folks like the glow in the dark look, and some are focussed on matching a deep water spectrum.

I personally try to mimic shallow water, with all parts of the spectrum, including near UV.
 
Upvote 0
Depends on the coral. It makes some pop and washes out others. Some folks like the glow in the dark look, and some are focussed on matching a deep water spectrum.

I personally try to mimic shallow water, with all parts of the spectrum, including near UV.
I've got a Radion on my 40 gallon and their presets are all basically set to 0 White.

All three Hydra Edge pre-sets have a healthy dose of White (on my 170). I haven't put any corals into the 170 so can't compare the glowing neon colors on the corals yet between the two fixtures.

The corals themselves don't particularly care if there's more or less White, right? This is for purely our own aesthetic preferences?
 
Upvote 0
IMG_4307.jpeg

I love daylight look! It’s great for coral health and so much better for fish viewing. I get the best of both worlds running intense white light for 8 hours and switching over to a ramping down blue spectrum to get some late viewing with the fluorescent glow.
 
Last edited:
Upvote 0
Hey guys,

I am running a reef tank with a RED SEA G3 60 tank using just one REA SEA ReefLED 90 light. How should I set up my light spectrum if I wish to use only white light and still be able to keep some basic SPS, LPS alive?

I have attached my current lighting setup in pictures. It start at 9:00 AM at 0% and peaks at 10:00 AM at 20% intensisity until 8:00 PM, then it goes back to 0 at 9:00 PM, and I have set only a little bit of blue light at 3% for an hour at night.

Is the current lighting schedule sustainable for coral? If anyone have a similiar experince on keeping coral alive with only white light please let me know.



b5b78eb6129437cfc9048c0450800f11.jpg
The first thing you need to understand is the Red Sea light has a very skewed wattage output between the 2 channels.

Your schedule is a whole 2W of light for the majority of your photoperiod. 😱

I'm sorry to say but the
Red Sea 90 is about the last light to use for a whitish spectrum.

features an 80W "Reef-Spec Blue" channel, a 10W 8,000K white channel, and a dedicated 3W moonlight
 
Upvote 0
IMG_4307.jpeg

I love daylight look! It’s great for coral health and so much better for fish viewing. I get the best of both worlds running intense white light for 8 hours and switching over to a ramping down blue spectrum to get some late viewing with the fluorescent glow.
Any chance you know the colour temperature you run for that picture? 12000k? Looks great.
Thanks.
 
Upvote 0
Any chance you know the colour temperature you run for that picture? 12000k? Looks great.
Thanks.
Thank you! It’s the shallow reef Meridian. I run whites about 90 percent and blues around 80. Not sure of kelvin if I had to guess 12-14k. I definitely run a whiter spectrum than most led users I see. This is with an orange filter, I should probably use a yellow lens filter to get a more accurate representation. This isn’t far off to my eye.
 
Upvote 0
The first thing you need to understand is the Red Sea light has a very skewed wattage output between the 2 channels.

Your schedule is a whole 2W of light for the majority of your photoperiod. 😱

I'm sorry to say but the
Red Sea 90 is about the last light to use for a whitish spectrum.
☝️
 
Upvote 0
Thank you! It’s the shallow reef Meridian. I run whites about 90 percent and blues around 80. Not sure of kelvin if I had to guess 12-14k. I definitely run a whiter spectrum than most led users I see. This is with an orange filter, I should probably use a yellow lens filter to get a more accurate representation. This isn’t far off to my eye.

You are spot on. Corals will adjust to the spectrum & the intensity that they get. We view tanks for our pleasure.

To be brutally honest, most inexperienced reefers run blue light to reduce & hide algae.
 
Upvote 0

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 21 25.9%
  • I’d trust someone who knows my tank to choose

    Votes: 7 8.6%
  • I’d rather get a gift card and pick it myself

    Votes: 30 37.0%
  • I’d prefer gear or supplies instead

    Votes: 2 2.5%
  • Please don’t surprise me with livestock

    Votes: 21 25.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new